{"id":8835146711276,"title":"High Temp Resin 1L (Form 4)","handle":"high-temp-resin-1l-form-4","description":"\u003cp\u003eHigh Temp Resin has a heat deflection temperature (HDT) of 238 °C @ 0.45 MPa — the highest among Formlabs resins.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eChoose High Temp Resin to print detailed, precise prototypes and end use parts that require high thermal stability, such as molds and inserts, parts exposed to hot air, gas, and fluid flow, as well as heat-resistant mounts, housings, and fixtures.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eForm 4(B)L print settings are in progress, view the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/support.formlabs.com\/s\/article\/Form-4L-generation-print-settings-roadmap\" class=\"voxel-product-description-link\"\u003esettings roadmap\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto see when settings for this material will be available on the Form 4(B)L.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy Choose High Temp Resin\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOur best material for stability under heat, High Temp Resin offers the highest heat deflection temperature among Formlabs resins.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh Thermal Stability\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHigh Temp Resin offers the highest heat deflection temperature of any Formlabs material.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEase of Use\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFormlabs' accessible technology makes it easy to experiment with high temperature applications.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWith the highest Heat Deflection Temperature of any Formlabs material, High Temp Resin is ideal for applications that require resistance to high temperatures.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHot air, gas, and fluid flow\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHeat resistant mounts, housings, and fixtures\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eMolds and inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eMaterial Properties\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGREEN\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003e Ultimate Tensile Strength\u003c\/strong\u003e\u003cbr\u003e21 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eTensile Modulus\u003c\/strong\u003e\u003cbr\u003e0.75 GPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eElongation at Break\u003c\/strong\u003e\u003cbr\u003e14%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eFlexural Modulus\u003c\/strong\u003e\u003cbr\u003e0.7 GPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003e Notched Izod\u003c\/strong\u003e\u003cbr\u003e33 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePOST-CURED AT 60°C\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"text-align: center; height: 19.6px;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eUltimate Tensile Strength\u003c\/strong\u003e\u003cbr\u003e58 MPa \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"text-align: center; height: 19.6px;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eTensile Modulus\u003c\/strong\u003e\u003cbr\u003e2.8 GPa\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"text-align: center; height: 19.6px;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eElongation at Break\u003c\/strong\u003e\u003cbr\u003e3.3%\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"text-align: center; height: 19.6px;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eFlexural Modulus\u003c\/strong\u003e\u003cbr\u003e2.6 GPa\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"text-align: center; height: 19.6px;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eNotched Izod\u003c\/strong\u003e\u003cbr\u003e18 J\/m\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePost-Processing\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eForm Wash Settings\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDuration\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e6 min\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003cbr\u003e\u003c\/strong\u003eDo not leave High Temp Resin in solvent for longer than 6 minutes total, as excessive solvent exposure affects the quality of the final part.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eForm Cure Settings\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDuration\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e120 min\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTemperature\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e80 °C\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003cbr\u003e\u003c\/strong\u003eThere are several post-curing options for High Temp V2. Refer to the technical data sheet to understand how different options affect mechanical properties, and choose the post-cure option that is best suited to the intended application. To achieve the highest HDT of 238 °C @ 0.45 MPa: (1) Post-cure parts in Form Cure for 120 min at 80 °C. (2) Thermally post-cure parts in a non-food oven for 3 hours at 160 °C. For applications that do not require the maximum heat resistance, post-cure parts in Form Cure for 60 min at 60 °C.\u003c\/p\u003e","published_at":"2025-03-20T16:21:16-04:00","created_at":"2025-03-20T16:04:32-04:00","vendor":"Formlabs","type":"Résines Formlabs","tags":["Form 4","formlabs","high temp","resin"],"price":28457,"price_min":28457,"price_max":28457,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46282284990700,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-RSN-HGH-TMP-0F4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"High Temp Resin 1L (Form 4)","public_title":null,"options":["Default Title"],"price":28457,"weight":1750,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294035179","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Formlabs_Form_4_High_Temp_Resin_1L_Product_Picture.webp?v=1742501890"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Formlabs_Form_4_High_Temp_Resin_1L_Product_Picture.webp?v=1742501890","options":["Title"],"media":[{"alt":null,"id":35115785322732,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Formlabs_Form_4_High_Temp_Resin_1L_Product_Picture.webp?v=1742501890"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Formlabs_Form_4_High_Temp_Resin_1L_Product_Picture.webp?v=1742501890","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHigh Temp Resin has a heat deflection temperature (HDT) of 238 °C @ 0.45 MPa — the highest among Formlabs resins.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eChoose High Temp Resin to print detailed, precise prototypes and end use parts that require high thermal stability, such as molds and inserts, parts exposed to hot air, gas, and fluid flow, as well as heat-resistant mounts, housings, and fixtures.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eForm 4(B)L print settings are in progress, view the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/support.formlabs.com\/s\/article\/Form-4L-generation-print-settings-roadmap\" class=\"voxel-product-description-link\"\u003esettings roadmap\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto see when settings for this material will be available on the Form 4(B)L.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy Choose High Temp Resin\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOur best material for stability under heat, High Temp Resin offers the highest heat deflection temperature among Formlabs resins.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh Thermal Stability\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHigh Temp Resin offers the highest heat deflection temperature of any Formlabs material.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEase of Use\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFormlabs' accessible technology makes it easy to experiment with high temperature applications.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWith the highest Heat Deflection Temperature of any Formlabs material, High Temp Resin is ideal for applications that require resistance to high temperatures.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHot air, gas, and fluid flow\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHeat resistant mounts, housings, and fixtures\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eMolds and inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eMaterial Properties\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGREEN\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003e Ultimate Tensile Strength\u003c\/strong\u003e\u003cbr\u003e21 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eTensile Modulus\u003c\/strong\u003e\u003cbr\u003e0.75 GPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eElongation at Break\u003c\/strong\u003e\u003cbr\u003e14%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eFlexural Modulus\u003c\/strong\u003e\u003cbr\u003e0.7 GPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003e Notched Izod\u003c\/strong\u003e\u003cbr\u003e33 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePOST-CURED AT 60°C\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"text-align: center; height: 19.6px;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eUltimate Tensile Strength\u003c\/strong\u003e\u003cbr\u003e58 MPa \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"text-align: center; height: 19.6px;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eTensile Modulus\u003c\/strong\u003e\u003cbr\u003e2.8 GPa\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"text-align: center; height: 19.6px;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eElongation at Break\u003c\/strong\u003e\u003cbr\u003e3.3%\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"text-align: center; height: 19.6px;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eFlexural Modulus\u003c\/strong\u003e\u003cbr\u003e2.6 GPa\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"text-align: center; height: 19.6px;\" class=\"voxel-product-description-table-element\"\u003e\n\u003cstrong\u003eNotched Izod\u003c\/strong\u003e\u003cbr\u003e18 J\/m\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePost-Processing\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eForm Wash Settings\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDuration\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e6 min\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003cbr\u003e\u003c\/strong\u003eDo not leave High Temp Resin in solvent for longer than 6 minutes total, as excessive solvent exposure affects the quality of the final part.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eForm Cure Settings\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDuration\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e120 min\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTemperature\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e80 °C\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003cbr\u003e\u003c\/strong\u003eThere are several post-curing options for High Temp V2. Refer to the technical data sheet to understand how different options affect mechanical properties, and choose the post-cure option that is best suited to the intended application. To achieve the highest HDT of 238 °C @ 0.45 MPa: (1) Post-cure parts in Form Cure for 120 min at 80 °C. (2) Thermally post-cure parts in a non-food oven for 3 hours at 160 °C. For applications that do not require the maximum heat resistance, post-cure parts in Form Cure for 60 min at 60 °C.\u003c\/p\u003e"}
High Temp Resin 1L (Form 4)
Produits Connexes
{"id":9105784897772,"title":"Carte Cadeau Voxel","handle":"carte-cadeau-voxel","description":"\u003cp\u003eCertificat Cadeau pour M. Patrick Gagnon\u003c\/p\u003e","published_at":"2025-12-12T10:09:32-05:00","created_at":"2025-12-12T10:09:29-05:00","vendor":"Voxel Factory","type":"","tags":[],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47098186301676,"title":"$40.00","option1":"$40.00","option2":null,"option3":null,"sku":null,"requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Carte Cadeau Voxel - $40.00","public_title":"$40.00","options":["$40.00"],"price":4000,"weight":0,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Denominations"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCertificat Cadeau pour M. Patrick Gagnon\u003c\/p\u003e"}
Carte Cadeau Voxel
$40.00
Certificat Cadeau pour M. Patrick Gagnon
{"id":9095136674028,"title":"Prusa Einsy RAMBo (MK3\/S\/+)","handle":"prusa-einsy-rambo-mk3-s","description":"\u003cp\u003eThis Einsy RAMBo board is flashed with firmware, which is compatible with MK3S and MK3S+ printers. In the case of the MK3 printer, you have to install a different version of the firmware.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca class=\"voxel-product-description-link\" target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/article\/firmware-updating-mk3s-mk3s-mk3_2227\"\u003eVisit this article\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor more instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eEinsy RAMBo with MK3S\/+ firmware (1 pcs)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePlug Aligner plastic part (1 pcs)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eATO Blade fuses 5A (rated for 32 VDC) (2 pcs)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eATO Blade fuse 15A (rated for 32 VDC) (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eManufacturer: Ultimachine\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eMain MCU: Atmega 2560\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eUSB-to-serial chip: Atmega 32u4\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eStepper motor driver: TMC2130, 1\/256th microstep motor drivers\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eRequires 24V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca target=\"_blank\" class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-12-03T12:04:59-05:00","created_at":"2025-12-03T12:04:57-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MK3","MK3S","MK3S-Plus"],"price":8499,"price_min":8499,"price_max":8499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47057874944236,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-EIN-RAM-MK3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Einsy RAMBo (MK3\/S\/+)","public_title":null,"options":["Default Title"],"price":8499,"weight":150,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Einsy_RAMBo_MK3_S_plus_Product_Picture.webp?v=1764781344"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Einsy_RAMBo_MK3_S_plus_Product_Picture.webp?v=1764781344","options":["Title"],"media":[{"alt":"Prusa Einsy RAMBo MK3\/S\/+","id":36345648546028,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Einsy_RAMBo_MK3_S_plus_Product_Picture.webp?v=1764781344"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Einsy_RAMBo_MK3_S_plus_Product_Picture.webp?v=1764781344","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis Einsy RAMBo board is flashed with firmware, which is compatible with MK3S and MK3S+ printers. In the case of the MK3 printer, you have to install a different version of the firmware.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca class=\"voxel-product-description-link\" target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/article\/firmware-updating-mk3s-mk3s-mk3_2227\"\u003eVisit this article\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor more instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eEinsy RAMBo with MK3S\/+ firmware (1 pcs)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePlug Aligner plastic part (1 pcs)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eATO Blade fuses 5A (rated for 32 VDC) (2 pcs)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eATO Blade fuse 15A (rated for 32 VDC) (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eManufacturer: Ultimachine\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eMain MCU: Atmega 2560\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eUSB-to-serial chip: Atmega 32u4\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eStepper motor driver: TMC2130, 1\/256th microstep motor drivers\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eRequires 24V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca target=\"_blank\" class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}
Prusa Einsy RAMBo (MK3/S/+)
$84.99
This Einsy RAMBo board is flashed with firmware, which is compatible with MK3S and MK3S+ printers. In the case of the MK3 printer, you have to install a different version of the firmware. Visit this article for more instructions. This product includes: Einsy RAMBo with MK3S/+ firmware (1 pcs) Plug Aligner plastic part (1 pcs) ATO Blade fuse...
{"id":9095123599596,"title":"Prusa Anti-vibration feet","handle":"prusa-anti-vibration-feet","description":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAnti-vibration foot (4\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epcs\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-12-03T11:31:54-05:00","created_at":"2025-12-03T11:31:52-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One L","CORE One\/+"],"price":599,"price_min":599,"price_max":599,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47057853939948,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-ANT-VIB-FEE-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Anti-vibration feet","public_title":null,"options":["Default Title"],"price":599,"weight":150,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Anti_vibration_feet_Product_Picture.webp?v=1764779828"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Anti_vibration_feet_Product_Picture.webp?v=1764779828","options":["Title"],"media":[{"alt":"Prusa Anti-vibration feet","id":36345629376748,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Anti_vibration_feet_Product_Picture.webp?v=1764779828"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Anti_vibration_feet_Product_Picture.webp?v=1764779828","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAnti-vibration foot (4\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epcs\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}
Prusa Anti-vibration feet
$5.99
This product includes: Anti-vibration foot (4 pcs) To correctly install this replacement part, visit the Prusa Research knowledge base at help.prusa3d.com, select your specific printer model, and follow the instructions provided in the repair manual.
{"id":9095119962348,"title":"Prusa Noga BN1010 - spare N1 blades for deburring tool (10 pcs)","handle":"prusa-noga-bn1010-spare-n1-blades-for-deburring-tool-10-pcs","description":"\u003cp\u003eSpare blades for Noga Teddy Burr - TB1000 deburring tool.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade material: H.S.S.\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade hardness: 62-64 HRC\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade angle: 40°\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eWeight: 13g\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePack quantity: 10 pcs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/prusa-research-tools\/products\/prusa-noga-teddy-burr-tb1000-deburring-tool\" class=\"voxel-product-description-link\"\u003eNoga Teddy Burr - TB1000 deburring tool\u003c\/a\u003e\u003c\/p\u003e","published_at":"2025-12-03T11:14:30-05:00","created_at":"2025-12-03T11:14:28-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":[],"price":3199,"price_min":3199,"price_max":3199,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47057814159596,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-NOG-BN1010-SPN-N1B","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Noga BN1010 - spare N1 blades for deburring tool (10 pcs)","public_title":null,"options":["Default Title"],"price":3199,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_BN1010_spare_N1_blades_for_deburring_tool_10_pcs_Product_Picture.webp?v=1764777343"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_BN1010_spare_N1_blades_for_deburring_tool_10_pcs_Product_Picture.webp?v=1764777343","options":["Title"],"media":[{"alt":"Noga BN1010 spare N1 blades for deburring tool (10 pcs)","id":36345587630316,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_BN1010_spare_N1_blades_for_deburring_tool_10_pcs_Product_Picture.webp?v=1764777343"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_BN1010_spare_N1_blades_for_deburring_tool_10_pcs_Product_Picture.webp?v=1764777343","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eSpare blades for Noga Teddy Burr - TB1000 deburring tool.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade material: H.S.S.\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade hardness: 62-64 HRC\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade angle: 40°\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eWeight: 13g\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePack quantity: 10 pcs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/prusa-research-tools\/products\/prusa-noga-teddy-burr-tb1000-deburring-tool\" class=\"voxel-product-description-link\"\u003eNoga Teddy Burr - TB1000 deburring tool\u003c\/a\u003e\u003c\/p\u003e"}
Prusa Noga BN1010 - spare N1 blades for deburring tool (10 pcs)
$31.99
Spare blades for Noga Teddy Burr - TB1000 deburring tool. Main features: Blade material: H.S.S. Blade hardness: 62-64 HRC Blade angle: 40° Weight: 13g Pack quantity: 10 pcs Noga Teddy Burr - TB1000 deburring tool
{"id":9094651085036,"title":"Prusa Noga Teddy Burr - TB1000 Deburring tool","handle":"prusa-noga-teddy-burr-tb1000-deburring-tool","description":"\u003cp\u003eDesigned for hard to reach locations thanks to its compact 8 mm painted hexagonal aluminum handle. Perfect for removing brim material or cleaning up any edges or holes on your 3d prints.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eCompact size\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePocket clip\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHolds 2.6 mm N1 blade\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade material: H.S.S.\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade hardness: 62-64 HRC\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade angle: 40°\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade is replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/collections\/prusa-research-tools\/products\/prusa-noga-bn1010-spare-n1-blades-for-deburring-tool-10-pcs\"\u003eSpare blades for Noga Teddy Burr - TB1000\u003c\/a\u003e\u003c\/p\u003e","published_at":"2025-12-03T10:26:40-05:00","created_at":"2025-12-02T16:31:44-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["Tools"],"price":2399,"price_min":2399,"price_max":2399,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052698452204,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-NOG-TED-BUR-TB1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Noga Teddy Burr - TB1000 Deburring tool","public_title":null,"options":["Default Title"],"price":2399,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_Teddy_Burr_TB1000_Deburring_tool_Product_Picture.webp?v=1764695520"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_Teddy_Burr_TB1000_Deburring_tool_Product_Picture.webp?v=1764695520","options":["Title"],"media":[{"alt":"Noga Teddy Burr TB1000 Deburring tool","id":36340788920556,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_Teddy_Burr_TB1000_Deburring_tool_Product_Picture.webp?v=1764695520"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_Teddy_Burr_TB1000_Deburring_tool_Product_Picture.webp?v=1764695520","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDesigned for hard to reach locations thanks to its compact 8 mm painted hexagonal aluminum handle. Perfect for removing brim material or cleaning up any edges or holes on your 3d prints.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eCompact size\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePocket clip\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHolds 2.6 mm N1 blade\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade material: H.S.S.\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade hardness: 62-64 HRC\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade angle: 40°\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade is replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/collections\/prusa-research-tools\/products\/prusa-noga-bn1010-spare-n1-blades-for-deburring-tool-10-pcs\"\u003eSpare blades for Noga Teddy Burr - TB1000\u003c\/a\u003e\u003c\/p\u003e"}
Prusa Noga Teddy Burr - TB1000 Deburring tool
$23.99
Designed for hard to reach locations thanks to its compact 8 mm painted hexagonal aluminum handle. Perfect for removing brim material or cleaning up any edges or holes on your 3d prints. Main features: Compact size Pocket clip Holds 2.6 mm N1 blade Blade material: H.S.S. Blade hardness: 62-64 HRC Blade angle: 40° Blade is replaceable Spa...
{"id":9094567592172,"title":"Prusa Parking plate set","handle":"prusa-parking-plate-set","description":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eNOZZLE SEAL (5\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epcs\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePARKING PLATE (5\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epcs\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit our knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\" target=\"_blank\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-12-02T12:00:11-05:00","created_at":"2025-12-02T12:00:09-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["XL"],"price":2199,"price_min":2199,"price_max":2199,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052356223212,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-PRK-PLT-SET-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Parking plate set","public_title":null,"options":["Default Title"],"price":2199,"weight":150,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Parking_plate_set_Product_Picture.webp?v=1764694475"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Parking_plate_set_Product_Picture.webp?v=1764694475","options":["Title"],"media":[{"alt":"Parking plate set","id":36340635566316,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Parking_plate_set_Product_Picture.webp?v=1764694475"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Parking_plate_set_Product_Picture.webp?v=1764694475","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eNOZZLE SEAL (5\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epcs\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePARKING PLATE (5\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epcs\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit our knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\" target=\"_blank\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}
Prusa Parking plate set
$21.99
This product includes: NOZZLE SEAL (5 pcs) PARKING PLATE (5 pcs) To correctly install this replacement part, visit our knowledge base at help.prusa3d.com, select your specific printer model, and follow the instructions provided in the repair manual.
{"id":9094557106412,"title":"Prusa Dwarf board","handle":"prusa-dwarf-board","description":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eDwarf Board (1\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epc\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit our knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-12-02T11:45:09-05:00","created_at":"2025-12-02T11:45:07-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["prusa","XL"],"price":8299,"price_min":8299,"price_max":8299,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052336660716,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-BRD-DWF-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Dwarf board","public_title":null,"options":["Default Title"],"price":8299,"weight":200,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Dwarf_Board_Product_Picture.webp?v=1764693710"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Dwarf_Board_Product_Picture.webp?v=1764693710","options":["Title"],"media":[{"alt":"Dwarf Board","id":36340533690604,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Dwarf_Board_Product_Picture.webp?v=1764693710"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Dwarf_Board_Product_Picture.webp?v=1764693710","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eDwarf Board (1\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epc\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit our knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}
Prusa Dwarf board
$82.99
This product includes: Dwarf Board (1 pc) To correctly install this replacement part, visit our knowledge base at help.prusa3d.com, select your specific printer model, and follow the instructions provided in the repair manual.
{"id":9094553501932,"title":"Prusa Cable splitter-dwarf","handle":"prusa-cable-splitter-dwarf","description":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eCable splitter-dwarf (1\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epc\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-12-02T11:29:00-05:00","created_at":"2025-12-02T11:28:58-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["prusa","XL"],"price":4099,"price_min":4099,"price_max":4099,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052307431660,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-CBL-SPL-DWF-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Cable splitter-dwarf","public_title":null,"options":["Default Title"],"price":4099,"weight":200,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Cable_splitter_dwarf_Product_Picture.webp?v=1764692333"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Cable_splitter_dwarf_Product_Picture.webp?v=1764692333","options":["Title"],"media":[{"alt":"Cable splitter dwarf","id":36340333773036,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Cable_splitter_dwarf_Product_Picture.webp?v=1764692333"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Cable_splitter_dwarf_Product_Picture.webp?v=1764692333","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eCable splitter-dwarf (1\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epc\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}
Prusa Cable splitter-dwarf
$40.99
This product includes: Cable splitter-dwarf (1 pc) To correctly install this replacement part, visit the Prusa Research knowledge base at help.prusa3d.com, select your specific printer model, and follow the instructions provided in the repair manual.
{"id":9094525419756,"title":"Heatbed thermistor set for MK4\/S","handle":"heatbed-thermistor-set-for-mk4-s","description":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHeatbed thermistor (1 pc)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eKapton tape (1 pc)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAluminium tape (1 pc)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa knowledge base at \u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-12-02T10:44:54-05:00","created_at":"2025-12-02T10:44:53-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MK3.5","MK3.5S","MK3.9","MK3.9S","MK4","MK4S"],"price":1099,"price_min":1099,"price_max":1099,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052247433452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-THR-BED-MK4-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Heatbed thermistor set for MK4\/S","public_title":null,"options":["Default Title"],"price":1099,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Heatbed_thermistor_set_for_MK4_S_Product_Picture.webp?v=1764690249"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Heatbed_thermistor_set_for_MK4_S_Product_Picture.webp?v=1764690249","options":["Title"],"media":[{"alt":"Heatbed thermistor set for MK4\/S","id":36339966542060,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Heatbed_thermistor_set_for_MK4_S_Product_Picture.webp?v=1764690249"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Heatbed_thermistor_set_for_MK4_S_Product_Picture.webp?v=1764690249","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHeatbed thermistor (1 pc)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eKapton tape (1 pc)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAluminium tape (1 pc)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa knowledge base at \u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}
Heatbed thermistor set for MK4/S
$10.99
This product includes: Heatbed thermistor (1 pc) Kapton tape (1 pc) Aluminium tape (1 pc) To correctly install this replacement part, visit the Prusa knowledge base at help.prusa3d.com, select your specific printer model, and follow the instructions provided in the repair manual.
![HighTemp Powder coated Print Sheet [HT90]](http://voxelfactory.myshopify.com/cdn/shop/files/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture_300x@2x.webp?v=1764684634)
![HighTemp Powder coated Print Sheet [HT90]](http://voxelfactory.myshopify.com/cdn/shop/files/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture_200x@2x.webp?v=1764684634)
{"id":9094475055340,"title":"HighTemp Powder-coated Print Sheet [HT90]","handle":"hightemp-powder-coated-print-sheet-ht90","description":"\u003cp\u003e\u003cspan\u003eThe HighTemp print sheet is intended for printing with special high-temperature materials, such as PEEK, PEEK-CF, PEI, PEKK, and PPSU, which may otherwise have poor (or too strong) adhesion on standard steel sheets. This sheet is compatible with Prusa Pro HT90.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOVERVIEW:\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike the regular Textured (TXT) sheet, the HighTemp sheet is designed for printing with high-temperature materials. It offers good adhesion to materials like PEEK, PEEK-CF, PEI, PEKK, and PPSU, plus it resists multiple cycles at temperatures over 100 °C. However, this print sheet is not suitable for printing standard low-temperature materials, such as PLA and PETG.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eList of supported materials:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEEK, PEEK-CF, PEEK-GF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEI1010, PEI 9085, PEI-CF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEKK, PEKK-CF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePES\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePPSU\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePSU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis print sheet has a very similar surface structure to the regular TXT sheet. This surface finish is made by powder coating on metal and leaves a nice, distinct textured look on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the tops of the small bumps can be scratched, which will not imprint on the bottom of the model. This type of surface is used on the Prusa print farm. Look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in the Prusa Online\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/article\/ht90-hightemp-powder-coated-print-sheet_900274\" target=\"_blank\"\u003eHelp article.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWARNING\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNever clean the HighTemp print sheet with IPA, acetone, or any other alcohol-based solvents! Doing so will damage the surface. Learn more about printing on the HighTemp print sheet in the online Prusa Help article.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; flex-direction: column; gap: 1em;\"\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eSuitable for printing high-temperature materials\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eTransfers texture to prints\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eMore forgiving Live Adjust Z setting\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eCan be washed only with dish soap and water\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eRequires a separation layer (\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/products\/magigoo-pro-ht\"\u003eMagigoo HT\u003c\/a\u003e)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eUnsuitable for low-temperature materials, such as PLA and PETG\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eGets damaged when cleaned with alcohol-based solvents\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as print sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks, or other cosmetic damage, is also not covered by the warranty. This includes dots caused by probing during the mesh bed leveling process, visible purge line, and local surface damage caused by applying an insufficient amount of\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/products\/magigoo-pro-ht\"\u003eMagigoo HT\u003c\/a\u003e. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 0.5em;\"\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/local-damage.jpg?v=1764686982\" alt=\"Local damage\"\u003e\u003cspan\u003eLocal surface damage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/nozzle-scratches.jpg?v=1764686981\" alt=\"Nozzles scratches\"\u003e\u003cspan\u003eScratched surface\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/nozzle-dots.jpg?v=1764686982\" alt=\"Nozzles dots\"\u003e\u003cspan\u003eVisible dots caused by probing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-12-02T09:50:59-05:00","created_at":"2025-12-02T09:50:58-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["HT90"],"price":19999,"price_min":19999,"price_max":19999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052012945644,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SHT-HTP-HT90-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"HighTemp Powder-coated Print Sheet [HT90]","public_title":null,"options":["Default Title"],"price":19999,"weight":150,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture.webp?v=1764684634"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture.webp?v=1764684634","options":["Title"],"media":[{"alt":"HighTemp Powder coated Print Sheet [HT90]","id":36339142754540,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture.webp?v=1764684634"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture.webp?v=1764684634","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe HighTemp print sheet is intended for printing with special high-temperature materials, such as PEEK, PEEK-CF, PEI, PEKK, and PPSU, which may otherwise have poor (or too strong) adhesion on standard steel sheets. This sheet is compatible with Prusa Pro HT90.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOVERVIEW:\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike the regular Textured (TXT) sheet, the HighTemp sheet is designed for printing with high-temperature materials. It offers good adhesion to materials like PEEK, PEEK-CF, PEI, PEKK, and PPSU, plus it resists multiple cycles at temperatures over 100 °C. However, this print sheet is not suitable for printing standard low-temperature materials, such as PLA and PETG.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eList of supported materials:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEEK, PEEK-CF, PEEK-GF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEI1010, PEI 9085, PEI-CF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEKK, PEKK-CF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePES\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePPSU\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePSU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis print sheet has a very similar surface structure to the regular TXT sheet. This surface finish is made by powder coating on metal and leaves a nice, distinct textured look on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the tops of the small bumps can be scratched, which will not imprint on the bottom of the model. This type of surface is used on the Prusa print farm. Look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in the Prusa Online\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/article\/ht90-hightemp-powder-coated-print-sheet_900274\" target=\"_blank\"\u003eHelp article.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWARNING\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNever clean the HighTemp print sheet with IPA, acetone, or any other alcohol-based solvents! Doing so will damage the surface. Learn more about printing on the HighTemp print sheet in the online Prusa Help article.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; flex-direction: column; gap: 1em;\"\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eSuitable for printing high-temperature materials\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eTransfers texture to prints\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eMore forgiving Live Adjust Z setting\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eCan be washed only with dish soap and water\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eRequires a separation layer (\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/products\/magigoo-pro-ht\"\u003eMagigoo HT\u003c\/a\u003e)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eUnsuitable for low-temperature materials, such as PLA and PETG\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eGets damaged when cleaned with alcohol-based solvents\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as print sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks, or other cosmetic damage, is also not covered by the warranty. This includes dots caused by probing during the mesh bed leveling process, visible purge line, and local surface damage caused by applying an insufficient amount of\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/products\/magigoo-pro-ht\"\u003eMagigoo HT\u003c\/a\u003e. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 0.5em;\"\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/local-damage.jpg?v=1764686982\" alt=\"Local damage\"\u003e\u003cspan\u003eLocal surface damage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/nozzle-scratches.jpg?v=1764686981\" alt=\"Nozzles scratches\"\u003e\u003cspan\u003eScratched surface\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/nozzle-dots.jpg?v=1764686982\" alt=\"Nozzles dots\"\u003e\u003cspan\u003eVisible dots caused by probing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
![HighTemp Powder coated Print Sheet [HT90]](http://voxelfactory.myshopify.com/cdn/shop/files/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture_1024x.webp?v=1764684634)
HighTemp Powder-coated Print Sheet [HT90]
$199.99
The HighTemp print sheet is intended for printing with special high-temperature materials, such as PEEK, PEEK-CF, PEI, PEKK, and PPSU, which may otherwise have poor (or too strong) adhesion on standard steel sheets. This sheet is compatible with Prusa Pro HT90. OVERVIEW: The Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. ...
{"id":9091634561260,"title":"Prusa Nozzle ObXidian","handle":"prusa-nozzle-obxidian","description":"\u003cp\u003eThe Prusa Nozzle ObXidian is a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehigh-quality nozzle designed specifically for Nextruder\u003c\/strong\u003e. It is made from\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehardened steel\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecorrosion-resistant coating\u003c\/strong\u003e, ensuring exceptional durability and longevity. These nozzles are particularly suitable\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efor printing with abrasive materials\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003elike carbon fiber, as they maintain their hardness even at higher temperatures, delivering excellent performance and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eextending the lifespan of your nozzle\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePrusa Nozzle ObXidian (1x)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-11-28T12:12:01-05:00","created_at":"2025-11-28T12:11:59-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One\/+","MK3.9","MK3.9S","MK4","MK4S","XL"],"price":6599,"price_min":6599,"price_max":8299,"available":false,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47036948152556,"title":"0.4mm","option1":"0.4mm","option2":null,"option3":null,"sku":"PRU-NOZ-OXN-040-000","requires_shipping":true,"taxable":true,"featured_image":{"id":45267315491052,"product_id":9091634561260,"position":2,"created_at":"2025-11-28T12:11:34-05:00","updated_at":"2025-11-28T12:14:33-05:00","alt":"Prusa Nozzle ObXidian 0.4mm","width":1400,"height":1050,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_4mm_Product_Picture.webp?v=1764350073","variant_ids":[47036948152556]},"available":false,"name":"Prusa Nozzle ObXidian - 0.4mm","public_title":"0.4mm","options":["0.4mm"],"price":8299,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Prusa Nozzle ObXidian 0.4mm","id":36317098082540,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_4mm_Product_Picture.webp?v=1764350073"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":47036948185324,"title":"0.6mm","option1":"0.6mm","option2":null,"option3":null,"sku":"PRU-NOZ-OXN-060-000","requires_shipping":true,"taxable":true,"featured_image":{"id":45267316015340,"product_id":9091634561260,"position":3,"created_at":"2025-11-28T12:11:44-05:00","updated_at":"2025-11-28T12:14:33-05:00","alt":"Prusa Nozzle ObXidian 0.6mm","width":1400,"height":1050,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_6mm_Product_Picture.webp?v=1764350073","variant_ids":[47036948185324]},"available":false,"name":"Prusa Nozzle ObXidian - 0.6mm","public_title":"0.6mm","options":["0.6mm"],"price":6599,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Prusa Nozzle ObXidian 0.6mm","id":36317098377452,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_6mm_Product_Picture.webp?v=1764350073"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_Thumbnail.webp?v=1764350073","\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_4mm_Product_Picture.webp?v=1764350073","\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_6mm_Product_Picture.webp?v=1764350073"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_Thumbnail.webp?v=1764350073","options":["Nozzle diameter"],"media":[{"alt":"Prusa Nozzle ObXidian Thumbnail","id":36317099589868,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_Thumbnail.webp?v=1764350073"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_Thumbnail.webp?v=1764350073","width":1400},{"alt":"Prusa Nozzle ObXidian 0.4mm","id":36317098082540,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_4mm_Product_Picture.webp?v=1764350073"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_4mm_Product_Picture.webp?v=1764350073","width":1400},{"alt":"Prusa Nozzle ObXidian 0.6mm","id":36317098377452,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_6mm_Product_Picture.webp?v=1764350073"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_6mm_Product_Picture.webp?v=1764350073","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Prusa Nozzle ObXidian is a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehigh-quality nozzle designed specifically for Nextruder\u003c\/strong\u003e. It is made from\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehardened steel\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecorrosion-resistant coating\u003c\/strong\u003e, ensuring exceptional durability and longevity. These nozzles are particularly suitable\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efor printing with abrasive materials\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003elike carbon fiber, as they maintain their hardness even at higher temperatures, delivering excellent performance and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eextending the lifespan of your nozzle\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePrusa Nozzle ObXidian (1x)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}
Prusa Nozzle ObXidian
$82.99
The Prusa Nozzle ObXidian is a high-quality nozzle designed specifically for Nextruder. It is made from hardened steel with a corrosion-resistant coating, ensuring exceptional durability and longevity. These nozzles are particularly suitable for printing with abrasive materials like carbon fiber, as they maintain their hardness even at higher te...
{"id":9085761716460,"title":"Original Prusa XL Extruder Upgrade","handle":"original-prusa-xl-dual-head-to-five-head-upgrade","description":"\u003cp\u003e\u003cspan\u003eThe Original Prusa XL has been \u003c\/span\u003e\u003cstrong\u003edesigned to allow a simple expansion to up to five toolheads.\u003c\/strong\u003e\u003cspan\u003e Additional extruders enable you to \u003c\/span\u003e\u003cstrong\u003ecombine multiple materials\u003c\/strong\u003e\u003cspan\u003e and enjoy multi-colored printing with little to no waste. Please note that the tools required for assembly are not included in the package - they can be purchased separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe Original Prusa XL has been designed with easy upgradeability in mind. Install one of the upgrade packages to increase the number of available toolheads and expand your 3D printing options.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWith a toolchanger in place and multiple toolheads, you can preload various filaments and combine them in a single print. With smart object designs, you can minimize the number of supports and even print with no waste whatsoever - no wipe tower, no filament scraps around the printer. Say goodbye to plastic waste that is heavier than the main printed object!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe combination of multiple filaments allows you to save precious material - for example, you can print the main object from PCCF filament and the supports from PLA which brings considerable cost savings!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe Package Contains\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e1 Toolhead to 5 Toolhead Upgrade\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e1x XL Single-Tool Nextruder Upgrade\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eIncludes 0.4mm nozzle (for existing Nextruder)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e4x XL Multi-Tool Nextruder (with 0.4 nozzle)\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eIncludes Spool Holder and Prusa Nextruder Sock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e1x XL Electronic Expansion kit\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eXLSplitter board\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAdditional power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e2x additional 0.4mm nozzles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e2 Toolhead to 5 Toolhead Upgrade\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e3x XL Multi-Tool Nextruder (with 0.4 nozzle)\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eIncludes Spool Holder and Prusa Nextruder Sock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e1x XL Electronic Expansion kit\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eXLSplitter board\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAdditional power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e2x 0.4mm nozzle (for existing Nextruder)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e1 Toolhead to 2 Toolhead Upgrade\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eXL Single-Tool Nextruder Upgrade\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eIncludes 0.4mm nozzle (for existing Nextruder)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eXL Multi-Tool Nextruder\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eTool Changer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTools Required for Assembly\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTo upgrade the XL with additional print heads, you will need a set of tools. See the list below. If you already have these tools at home (all of them are part of the Original Prusa XL package), you don’t have to buy them again.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; width: 100%;\"\u003e\n\u003cimg style=\"width: 50%;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/XL_tools_Eshop_24.jpg?v=1763560062\" alt=\"\"\u003e \u003cimg style=\"width: 50%;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/XL_tools_Eshop.jpg?v=1763560077\" alt=\"\"\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cstrong\u003eMini wrench\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- used for dock calibration. It can be replaced with a small flathead screwdriver\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cstrong\u003eUni-wrench\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- used for dock calibration\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cstrong\u003ePH2 screwdriver\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- required for terminal screws, a standard PH2 screwdriver\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\u003cstrong\u003eNeedle-nose pliers\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cstrong\u003eT10 key\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- at least 71 mm long\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cstrong\u003e2.5mm Allen key\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- at least 86 mm long, as thin as possible due to space limitations\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cstrong\u003e3.0mm Allen key\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- at least 128 mm long\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2025-11-19T11:00:44-05:00","created_at":"2025-11-19T10:07:08-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["XL"],"price":87900,"price_min":87900,"price_max":249900,"available":false,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47015704199404,"title":"1-ToolHead to 2-ToolHead","option1":"1-ToolHead to 2-ToolHead","option2":null,"option3":null,"sku":"PRU-UPG-0XL-SIN-DUA","requires_shipping":true,"taxable":true,"featured_image":{"id":45224575402220,"product_id":9085761716460,"position":1,"created_at":"2025-11-19T10:05:32-05:00","updated_at":"2025-11-19T10:12:06-05:00","alt":"Original Prusa XL Single Tool to Dual Head Upgrade","width":1400,"height":1050,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Single_Tool_to_Dual_Head_Upgrade_product_picture.webp?v=1763565126","variant_ids":[47015704199404]},"available":false,"name":"Original Prusa XL Extruder Upgrade - 1-ToolHead to 2-ToolHead","public_title":"1-ToolHead to 2-ToolHead","options":["1-ToolHead to 2-ToolHead"],"price":87900,"weight":0,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Original Prusa XL Single Tool to Dual Head Upgrade","id":36290202304748,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Single_Tool_to_Dual_Head_Upgrade_product_picture.webp?v=1763565126"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":47015704166636,"title":"1-ToolHead to 5-ToolHead","option1":"1-ToolHead to 5-ToolHead","option2":null,"option3":null,"sku":"PRU-UPG-0XL-SIN-FIV","requires_shipping":true,"taxable":true,"featured_image":{"id":45224575697132,"product_id":9085761716460,"position":2,"created_at":"2025-11-19T10:05:46-05:00","updated_at":"2025-11-19T10:12:06-05:00","alt":"Original Prusa XL Single Tool to Five Head Upgrade","width":1400,"height":1050,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Single_Tool_to_Five_Head_Upgrade_product_picture.webp?v=1763565126","variant_ids":[47015704166636]},"available":false,"name":"Original Prusa XL Extruder Upgrade - 1-ToolHead to 5-ToolHead","public_title":"1-ToolHead to 5-ToolHead","options":["1-ToolHead to 5-ToolHead"],"price":249900,"weight":0,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Original Prusa XL Single Tool to Five Head Upgrade","id":36290202337516,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Single_Tool_to_Five_Head_Upgrade_product_picture.webp?v=1763565126"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":47015704133868,"title":"2-ToolHead to 5-ToolHead","option1":"2-ToolHead to 5-ToolHead","option2":null,"option3":null,"sku":"PRU-UPG-0XL-DUA-FIV","requires_shipping":true,"taxable":true,"featured_image":{"id":45224574025964,"product_id":9085761716460,"position":3,"created_at":"2025-11-19T10:05:17-05:00","updated_at":"2025-11-19T10:12:06-05:00","alt":"Original Prusa XL Dual Head to Five Head Upgrade","width":1400,"height":1050,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Dual_Head_to_Five_Head_Upgrade_product_picture.webp?v=1763565126","variant_ids":[47015704133868]},"available":false,"name":"Original Prusa XL Extruder Upgrade - 2-ToolHead to 5-ToolHead","public_title":"2-ToolHead to 5-ToolHead","options":["2-ToolHead to 5-ToolHead"],"price":174900,"weight":0,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Original Prusa XL Dual Head to Five Head Upgrade","id":36290201780460,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Dual_Head_to_Five_Head_Upgrade_product_picture.webp?v=1763565126"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Single_Tool_to_Dual_Head_Upgrade_product_picture.webp?v=1763565126","\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Single_Tool_to_Five_Head_Upgrade_product_picture.webp?v=1763565126","\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Dual_Head_to_Five_Head_Upgrade_product_picture.webp?v=1763565126","\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Extruder_Upgrade_ToolHead_Part.webp?v=1763654448","\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Extruder_Upgrade_Back_Part_For_Upgrade.webp?v=1763654448","\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Extruder_Upgrade_Box.webp?v=1763654448"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Single_Tool_to_Dual_Head_Upgrade_product_picture.webp?v=1763565126","options":["Extruder Upgrade Package"],"media":[{"alt":"Original Prusa XL Single Tool to Dual Head Upgrade","id":36290202304748,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Single_Tool_to_Dual_Head_Upgrade_product_picture.webp?v=1763565126"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Single_Tool_to_Dual_Head_Upgrade_product_picture.webp?v=1763565126","width":1400},{"alt":"Original Prusa XL Single Tool to Five Head Upgrade","id":36290202337516,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Single_Tool_to_Five_Head_Upgrade_product_picture.webp?v=1763565126"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Single_Tool_to_Five_Head_Upgrade_product_picture.webp?v=1763565126","width":1400},{"alt":"Original Prusa XL Dual Head to Five Head Upgrade","id":36290201780460,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Dual_Head_to_Five_Head_Upgrade_product_picture.webp?v=1763565126"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Dual_Head_to_Five_Head_Upgrade_product_picture.webp?v=1763565126","width":1400},{"alt":"Original Prusa XL Extruder Upgrade ToolHead Part","id":36293745049836,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Extruder_Upgrade_ToolHead_Part.webp?v=1763654448"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Extruder_Upgrade_ToolHead_Part.webp?v=1763654448","width":1400},{"alt":"Original Prusa XL Extruder Upgrade Back Part For Upgrade","id":36293745082604,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Extruder_Upgrade_Back_Part_For_Upgrade.webp?v=1763654448"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Extruder_Upgrade_Back_Part_For_Upgrade.webp?v=1763654448","width":1400},{"alt":"Original Prusa XL Extruder Upgrade Box","id":36293745115372,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Extruder_Upgrade_Box.webp?v=1763654448"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Original_Prusa_XL_Extruder_Upgrade_Box.webp?v=1763654448","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe Original Prusa XL has been \u003c\/span\u003e\u003cstrong\u003edesigned to allow a simple expansion to up to five toolheads.\u003c\/strong\u003e\u003cspan\u003e Additional extruders enable you to \u003c\/span\u003e\u003cstrong\u003ecombine multiple materials\u003c\/strong\u003e\u003cspan\u003e and enjoy multi-colored printing with little to no waste. Please note that the tools required for assembly are not included in the package - they can be purchased separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe Original Prusa XL has been designed with easy upgradeability in mind. Install one of the upgrade packages to increase the number of available toolheads and expand your 3D printing options.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWith a toolchanger in place and multiple toolheads, you can preload various filaments and combine them in a single print. With smart object designs, you can minimize the number of supports and even print with no waste whatsoever - no wipe tower, no filament scraps around the printer. Say goodbye to plastic waste that is heavier than the main printed object!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe combination of multiple filaments allows you to save precious material - for example, you can print the main object from PCCF filament and the supports from PLA which brings considerable cost savings!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe Package Contains\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e1 Toolhead to 5 Toolhead Upgrade\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e1x XL Single-Tool Nextruder Upgrade\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eIncludes 0.4mm nozzle (for existing Nextruder)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e4x XL Multi-Tool Nextruder (with 0.4 nozzle)\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eIncludes Spool Holder and Prusa Nextruder Sock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e1x XL Electronic Expansion kit\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eXLSplitter board\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAdditional power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e2x additional 0.4mm nozzles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e2 Toolhead to 5 Toolhead Upgrade\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e3x XL Multi-Tool Nextruder (with 0.4 nozzle)\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eIncludes Spool Holder and Prusa Nextruder Sock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e1x XL Electronic Expansion kit\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eXLSplitter board\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAdditional power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e2x 0.4mm nozzle (for existing Nextruder)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e1 Toolhead to 2 Toolhead Upgrade\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eXL Single-Tool Nextruder Upgrade\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eIncludes 0.4mm nozzle (for existing Nextruder)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eXL Multi-Tool Nextruder\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eTool Changer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTools Required for Assembly\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTo upgrade the XL with additional print heads, you will need a set of tools. See the list below. If you already have these tools at home (all of them are part of the Original Prusa XL package), you don’t have to buy them again.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; width: 100%;\"\u003e\n\u003cimg style=\"width: 50%;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/XL_tools_Eshop_24.jpg?v=1763560062\" alt=\"\"\u003e \u003cimg style=\"width: 50%;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/XL_tools_Eshop.jpg?v=1763560077\" alt=\"\"\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cstrong\u003eMini wrench\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- used for dock calibration. It can be replaced with a small flathead screwdriver\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cstrong\u003eUni-wrench\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- used for dock calibration\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cstrong\u003ePH2 screwdriver\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- required for terminal screws, a standard PH2 screwdriver\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\u003cstrong\u003eNeedle-nose pliers\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cstrong\u003eT10 key\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- at least 71 mm long\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cstrong\u003e2.5mm Allen key\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- at least 86 mm long, as thin as possible due to space limitations\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cstrong\u003e3.0mm Allen key\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- at least 128 mm long\u003c\/li\u003e\n\u003c\/ul\u003e"}
Original Prusa XL Extruder Upgrade
$879.00
The Original Prusa XL has been designed to allow a simple expansion to up to five toolheads. Additional extruders enable you to combine multiple materials and enjoy multi-colored printing with little to no waste. Please note that the tools required for assembly are not included in the package - they can be purchased separately. The Original Pru...
