{"id":7837990682860,"title":"Formlabs Nylon 11 CF (Carbon Fiber) Powder 6Kg","handle":"formlabs-nylon-11-cf-powder-6kg","description":"\u003cp\u003eGet the best of nylon and carbon fiber all in one high-performance material, perfect for end-use applications that require both superior stiffness and strength. Choose Nylon 11 CF Powder to produce lightweight, rigid parts that remain structurally and thermally stable and can sustain repeated impact.\u003c\/p\u003e\n\u003cp\u003eThis material requires Sift 300 Sieve to be used with Fuse Sift.\u003c\/p\u003e\n\u003cp\u003eNylon 11 CF Powder can act as an irritant of skin and mucosal membranes. Please refer to the\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Download Nylon 11 CF Powder Technical Data Sheet\" href=\"https:\/\/formlabs-media.formlabs.com\/datasheets\/2201687-SDS-ENCA-0.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/support.formlabs.com\/s\/article\/Safety-with-Nylon-11-CF?language=en_US\" title=\"Safety with Nylon 11 CF article\" target=\"_blank\"\u003eSupport Article\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor usage guidelines.\u003c\/p\u003e\n\u003cp\u003eThe following PPE is recommended when working with Nylon 11 CF Powder:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eN95 mask or other equivalent respiratory protection\u003c\/li\u003e\n\u003cli\u003eImpermeable gloves\u003c\/li\u003e\n\u003cli\u003eAppropriate attire that prevents skin contact with powder such as long sleeves, pants, or lab coats (ideally with elastic cuffs)\u003c\/li\u003e\n\u003cli\u003eSafety glasses with side shields\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor best results \u0026amp; to reduce refresh rate from 50% to 30%, print using the Fuse 1+ 30W with an \u003c\/span\u003e\u003ca href=\"https:\/\/support.formlabs.com\/s\/article\/Using-inert-atmospheric-control-Fuse-1?language=en_US\" title=\"Inert atmospheric control article\" rel=\"noopener noreferrer\" target=\"_blank\"\u003einert atmospheric control\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__qRPu1 Header_as-h5__8QC9o Header_weight-700__AniPs Header_light__eMDdl Header_light-primary__92_EW\"\u003eWhy Choose Nylon 11 CF Powder\u003c\/h2\u003e\n\u003cdiv class=\"TextPlugin_light__HiOH1 TextPlugin_text-plugin__u4_Uw TextPlugin_theme__sG0yW\"\u003e\n\u003cp\u003eNylon 11 CF Power is a carbon-fiber reinforced material, ideal to produce stiff, strong, and lightweight end-use parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_grid-padding-x__zlZjS Grid_stretch__xyssA\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eCarbon Fiber-Filled\u003c\/strong\u003e\u003cbr\u003eProduce high-performance composite parts for strenuous end-use applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eStiff \u0026amp; Strong\u003c\/strong\u003e\u003cbr\u003eGet the best of both worlds with the rigidity of carbon fibers and the ductility of nylon 11.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_grid-padding-x__zlZjS Grid_stretch__xyssA\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eLightweight\u003c\/strong\u003e\u003cbr\u003ePush the limits of design with a high strength-to-weight ratio on top of the geometric freedom of 3D printing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eTruly Durable\u003c\/strong\u003e\u003cbr\u003eDeliver environmentally stable parts for long-term use that maintain dimensional accuracy over time and can take repeated impact.\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__qRPu1 Header_as-h5__8QC9o Header_weight-700__AniPs Header_black__eSI91\"\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__u4_Uw TextPlugin_theme__sG0yW\"\u003e\n\u003cp\u003eNylon 11 CF Powder is our highest performance material for the Fuse 1+ 30W. Choose this material for parts that need to be strong, lightweight and stable over time, even at elevated temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_stretch__xyssA\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH Grid_small-24__eNIm2 Grid_medium-12__sNNzE Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv class=\"CheckmarkList_list-container__7gb8X\"\u003e\n\u003cdiv class=\"CheckmarkList_columns-1__7ZY9W CheckmarkList_margin-vertical-2__s7QcK CheckmarkList_item__fTCOX CheckmarkList_font-size-0__xJ_u2\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__7mNUx Icon_icon__qbeSm\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eReplacement and spare alternatives to metal parts\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"CheckmarkList_columns-1__7ZY9W CheckmarkList_margin-vertical-2__s7QcK CheckmarkList_item__fTCOX CheckmarkList_font-size-0__xJ_u2\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__7mNUx Icon_icon__qbeSm\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eHigh-impact equipment\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__TVgMH Grid_small-24__eNIm2 Grid_medium-12__sNNzE Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv class=\"CheckmarkList_list-container__7gb8X\"\u003e\n\u003cdiv class=\"CheckmarkList_columns-1__7ZY9W CheckmarkList_margin-vertical-2__s7QcK CheckmarkList_item__fTCOX CheckmarkList_font-size-0__xJ_u2\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__7mNUx Icon_icon__qbeSm\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eTooling, jigs, fixtures\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"CheckmarkList_columns-1__7ZY9W CheckmarkList_margin-vertical-2__s7QcK CheckmarkList_item__fTCOX CheckmarkList_font-size-0__xJ_u2\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__7mNUx Icon_icon__qbeSm\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eFunctional composite prototypes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__u4_Uw TextPlugin_theme__sG0yW\"\u003e\n\u003cp\u003e\u003csub\u003e* Material properties may vary based on part design and manufacturing practices. It is the manufacturer’s responsibility to validate the suitability of the printed parts for the intended use.\u003c\/sub\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eFuse 1+ 30w\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFor best results \u0026amp; to reduce refresh rate from 50% to 30%, print using the Fuse 1+ 30W with an \u003ca title=\"Inert atmospheric control article\" href=\"https:\/\/support.formlabs.com\/s\/article\/Using-inert-atmospheric-control-Fuse-1?language=en_US\" target=\"_blank\"\u003einert atmospheric control\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eData sheets\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"Download Nylon 11 CF Powder Technical Data Sheet\" href=\"https:\/\/formlabs-media.formlabs.com\/datasheets\/2201694-TDS-ENUS-0.pdf\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan class=\"Button_content__WwYqe\"\u003e\u003cspan\u003eDownload Nylon 11 CF Powder Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"Download%20Nylon%2011%20CF%20Powder%20Technical%20Data%20Sheet\" title=\"Download Nylon 11 CF Powder Technical Data Sheet\" target=\"_blank\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan class=\"Button_content__WwYqe\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDownload Nylon 11 CF Powder Safety Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2023-06-14T14:15:07-04:00","created_at":"2022-12-01T15:12:19-05:00","vendor":"Formlabs","type":"Formlabs SLS Powders","tags":["formlabs","Powder","SLS"],"price":142857,"price_min":142857,"price_max":142857,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43536481747180,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-SLS-PCF-N11-6KG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Formlabs Nylon 11 CF (Carbon Fiber) Powder 6Kg","public_title":null,"options":["Default Title"],"price":142857,"weight":6800,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294032574","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Formlabs_Nylon_11_CF__Carbon_Fiber__SLS_Powder_6Kg.webp?v=1739810072"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Formlabs_Nylon_11_CF__Carbon_Fiber__SLS_Powder_6Kg.webp?v=1739810072","options":["Title"],"media":[{"alt":"Formlabs Nylon 11 CF (Carbon Fiber) Powder 6Kg - Voxel Factory -3D printer- Imprimante 3D","id":31714715336940,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Formlabs_Nylon_11_CF__Carbon_Fiber__SLS_Powder_6Kg.webp?v=1739810072"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Formlabs_Nylon_11_CF__Carbon_Fiber__SLS_Powder_6Kg.webp?v=1739810072","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eGet the best of nylon and carbon fiber all in one high-performance material, perfect for end-use applications that require both superior stiffness and strength. Choose Nylon 11 CF Powder to produce lightweight, rigid parts that remain structurally and thermally stable and can sustain repeated impact.\u003c\/p\u003e\n\u003cp\u003eThis material requires Sift 300 Sieve to be used with Fuse Sift.\u003c\/p\u003e\n\u003cp\u003eNylon 11 CF Powder can act as an irritant of skin and mucosal membranes. Please refer to the\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Download Nylon 11 CF Powder Technical Data Sheet\" href=\"https:\/\/formlabs-media.formlabs.com\/datasheets\/2201687-SDS-ENCA-0.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/support.formlabs.com\/s\/article\/Safety-with-Nylon-11-CF?language=en_US\" title=\"Safety with Nylon 11 CF article\" target=\"_blank\"\u003eSupport Article\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor usage guidelines.\u003c\/p\u003e\n\u003cp\u003eThe following PPE is recommended when working with Nylon 11 CF Powder:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eN95 mask or other equivalent respiratory protection\u003c\/li\u003e\n\u003cli\u003eImpermeable gloves\u003c\/li\u003e\n\u003cli\u003eAppropriate attire that prevents skin contact with powder such as long sleeves, pants, or lab coats (ideally with elastic cuffs)\u003c\/li\u003e\n\u003cli\u003eSafety glasses with side shields\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor best results \u0026amp; to reduce refresh rate from 50% to 30%, print using the Fuse 1+ 30W with an \u003c\/span\u003e\u003ca href=\"https:\/\/support.formlabs.com\/s\/article\/Using-inert-atmospheric-control-Fuse-1?language=en_US\" title=\"Inert atmospheric control article\" rel=\"noopener noreferrer\" target=\"_blank\"\u003einert atmospheric control\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__qRPu1 Header_as-h5__8QC9o Header_weight-700__AniPs Header_light__eMDdl Header_light-primary__92_EW\"\u003eWhy Choose Nylon 11 CF Powder\u003c\/h2\u003e\n\u003cdiv class=\"TextPlugin_light__HiOH1 TextPlugin_text-plugin__u4_Uw TextPlugin_theme__sG0yW\"\u003e\n\u003cp\u003eNylon 11 CF Power is a carbon-fiber reinforced material, ideal to produce stiff, strong, and lightweight end-use parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_grid-padding-x__zlZjS Grid_stretch__xyssA\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eCarbon Fiber-Filled\u003c\/strong\u003e\u003cbr\u003eProduce high-performance composite parts for strenuous end-use applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eStiff \u0026amp; Strong\u003c\/strong\u003e\u003cbr\u003eGet the best of both worlds with the rigidity of carbon fibers and the ductility of nylon 11.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_grid-padding-x__zlZjS Grid_stretch__xyssA\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eLightweight\u003c\/strong\u003e\u003cbr\u003ePush the limits of design with a high strength-to-weight ratio on top of the geometric freedom of 3D printing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eTruly Durable\u003c\/strong\u003e\u003cbr\u003eDeliver environmentally stable parts for long-term use that maintain dimensional accuracy over time and can take repeated impact.\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__qRPu1 Header_as-h5__8QC9o Header_weight-700__AniPs Header_black__eSI91\"\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__u4_Uw TextPlugin_theme__sG0yW\"\u003e\n\u003cp\u003eNylon 11 CF Powder is our highest performance material for the Fuse 1+ 30W. Choose this material for parts that need to be strong, lightweight and stable over time, even at elevated temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_stretch__xyssA\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH Grid_small-24__eNIm2 Grid_medium-12__sNNzE Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv class=\"CheckmarkList_list-container__7gb8X\"\u003e\n\u003cdiv class=\"CheckmarkList_columns-1__7ZY9W CheckmarkList_margin-vertical-2__s7QcK CheckmarkList_item__fTCOX CheckmarkList_font-size-0__xJ_u2\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__7mNUx Icon_icon__qbeSm\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eReplacement and spare alternatives to metal parts\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"CheckmarkList_columns-1__7ZY9W CheckmarkList_margin-vertical-2__s7QcK CheckmarkList_item__fTCOX CheckmarkList_font-size-0__xJ_u2\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__7mNUx Icon_icon__qbeSm\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eHigh-impact equipment\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__TVgMH Grid_small-24__eNIm2 Grid_medium-12__sNNzE Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv class=\"CheckmarkList_list-container__7gb8X\"\u003e\n\u003cdiv class=\"CheckmarkList_columns-1__7ZY9W CheckmarkList_margin-vertical-2__s7QcK CheckmarkList_item__fTCOX CheckmarkList_font-size-0__xJ_u2\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__7mNUx Icon_icon__qbeSm\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eTooling, jigs, fixtures\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"CheckmarkList_columns-1__7ZY9W CheckmarkList_margin-vertical-2__s7QcK CheckmarkList_item__fTCOX CheckmarkList_font-size-0__xJ_u2\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__7mNUx Icon_icon__qbeSm\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eFunctional composite prototypes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__u4_Uw TextPlugin_theme__sG0yW\"\u003e\n\u003cp\u003e\u003csub\u003e* Material properties may vary based on part design and manufacturing practices. It is the manufacturer’s responsibility to validate the suitability of the printed parts for the intended use.\u003c\/sub\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eFuse 1+ 30w\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFor best results \u0026amp; to reduce refresh rate from 50% to 30%, print using the Fuse 1+ 30W with an \u003ca title=\"Inert atmospheric control article\" href=\"https:\/\/support.formlabs.com\/s\/article\/Using-inert-atmospheric-control-Fuse-1?language=en_US\" target=\"_blank\"\u003einert atmospheric control\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eData sheets\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"Download Nylon 11 CF Powder Technical Data Sheet\" href=\"https:\/\/formlabs-media.formlabs.com\/datasheets\/2201694-TDS-ENUS-0.pdf\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan class=\"Button_content__WwYqe\"\u003e\u003cspan\u003eDownload Nylon 11 CF Powder Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"Download%20Nylon%2011%20CF%20Powder%20Technical%20Data%20Sheet\" title=\"Download Nylon 11 CF Powder Technical Data Sheet\" target=\"_blank\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan class=\"Button_content__WwYqe\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDownload Nylon 11 CF Powder Safety Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Formlabs Nylon 11 CF (Carbon Fiber) Powder 6Kg

Produit Précédent | Produit Suivant

Description du produit

Voxel SKU: FLB-SLS-PCF-N11-6KG

Vendeur: Formlabs

Vendor MPN: PD-FS-P11C-01

$1,428.57

La quantité maximale disponible est atteinte.

Étiquette : formlabs Powder SLS

Produits Connexes

Bambu Lab Engineering Plate [ H2D | H2S ]

EN STOCK : 0

$84.99

{"id":9109603057900,"title":"Bambu Lab Engineering Plate [ H2D | H2S ]","handle":"bambu-lab-engineering-plate-h2d-h2s","description":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Engineering_Plate_PC.png?v=1765913950\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOne Build Plate for All Filaments\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eWith a simple layer of glue, the Engineering Plate is compatible with our entire filament lineup, it's the perfect go-to solution when you're not sure which plate to use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDurable Smooth Surface Coating\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe refreshed coating significantly improves the plate's temperature, scratch, and corrosion resistance. Built to withstand prolonged high-temperature printing and hundreds of washes and peels, its smooth, dependable surface guarantees stable adhesion every single time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSmooth \u0026amp; Natural Surface Finish\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe smooth base coating can impart a smooth \u0026amp; flat texture to the bottom surface of the printed object, better blend-in with other surfaces.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eConsiderations\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003col style=\"list-style-type: decimal;\" class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBefore printing with any filament, it is recommended to apply glue on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEngineering Plate\u003c\/strong\u003e. Applying\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esolid glue\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecan make part removal easier, but since solid glue has a certain thickness and is difficult to apply evenly, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprinting stability and first-layer quality\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare usually not as good as when using\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eliquid glue\u003c\/strong\u003e. On the other hand,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eliquid glue\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emay make part removal more difficult. You should choose the appropriate glue type based on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efilament\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprinting environment\u003c\/strong\u003e, and other practical conditions. For more details, please refer to the official wiki:\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/wiki.bambulab.com\/en\/general\/how-to-use-bbl-liquid-glue\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eWhen using a scraper to remove prints, make sure to use the correct technique. If the model adheres too tightly to the build plate, apply alcohol to the interface between the model and the plate to reduce adhesion and make removal easier. This helps prevent damage to the model, the build plate, or potential injury to the user caused by excessive force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eIncreasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eFor X1 series, P1 series, and A1 printers, before auto-leveling, it is necessary to repeatedly rub the nozzle in the wiping area of the build plate to thoroughly remove any residual material at the tip of the nozzle. The coating in the wiping area will gradually wear over time, which is normal and does not affect print quality or nozzle lifespan, so there is no need to worry about quality issues.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eDust and grease deposits on the build plate can reduce adhesion. It is recommended to regularly clean the build plate with warm water and dish soap to maintain optimal adhesion. Do not use other unapproved cleaning agents.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBambu Lab recommends only using Bambu Lab official glue on the Bambu Lab build plates, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates. Do not clean the Engineering Plate with Acetone, as it will damage the Engineering Plate surface.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAlways wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eThe latest firmware brings significant improvements to the Bambu Engineering Plate calibration using the Micro Lidar, and it is now fully compatible with the automatic calibration process.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eThe Engineering Plate plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eRecommended Settings\u003c\/h5\u003e\n\u003cp\u003ePlease note that other slicer settings might need to be adjusted based on the printed model and the filament requirements\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eHeatbed Temperature\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eGlue Stick Required?\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePLA\/PLA-CF\/PLA-GF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e45~60℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePETG\/PETG-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e60~80℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eABS (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~100℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eASA (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~100℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eTPU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e35~45℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePVA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e45~60℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePC\/PC-CF (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~110℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePA\/PA-CF\/PAHT-CF (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~110℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePET-CF (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e80~100℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePolyester powder + manganese steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eSurface Temperature Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cspan\u003eUp to 120℃\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eThickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cspan\u003e0.5mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eUsable Print Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cspan\u003eP2S-256mm*256mm\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2S-350mm*320mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2D-350mm*320mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePackaging Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cspan\u003eP2S-295mm*315mm*13mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2S-393mm*380mm*15mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2D-393mm*380mm*15mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePackaging Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cspan\u003e0.50kg\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e0.78kg\u003cbr\u003e0.78kg\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2025-12-16T15:16:53-05:00","created_at":"2025-12-16T15:07:01-05:00","vendor":"Bambu Lab","type":"bambu Lab parts","tags":["H2D","H2D Pro","H2S"],"price":8499,"price_min":8499,"price_max":8499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47115653316844,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-PRT-ENG-PLT-0H2","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bambu Lab Engineering Plate [ H2D | H2S ]","public_title":null,"options":["Default Title"],"price":8499,"weight":788,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6937285510402","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Bambu_Lab_Engineering_Plate_H2D_H2S_Product_Picture.webp?v=1765916099"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Bambu_Lab_Engineering_Plate_H2D_H2S_Product_Picture.webp?v=1765916099","options":["Title"],"media":[{"alt":"Bambu Lab Engineering Plate H2D and H2S","id":36426336501996,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Bambu_Lab_Engineering_Plate_H2D_H2S_Product_Picture.webp?v=1765916099"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Bambu_Lab_Engineering_Plate_H2D_H2S_Product_Picture.webp?v=1765916099","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Engineering_Plate_PC.png?v=1765913950\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOne Build Plate for All Filaments\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eWith a simple layer of glue, the Engineering Plate is compatible with our entire filament lineup, it's the perfect go-to solution when you're not sure which plate to use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDurable Smooth Surface Coating\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe refreshed coating significantly improves the plate's temperature, scratch, and corrosion resistance. Built to withstand prolonged high-temperature printing and hundreds of washes and peels, its smooth, dependable surface guarantees stable adhesion every single time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSmooth \u0026amp; Natural Surface Finish\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe smooth base coating can impart a smooth \u0026amp; flat texture to the bottom surface of the printed object, better blend-in with other surfaces.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eConsiderations\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003col style=\"list-style-type: decimal;\" class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBefore printing with any filament, it is recommended to apply glue on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEngineering Plate\u003c\/strong\u003e. Applying\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esolid glue\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecan make part removal easier, but since solid glue has a certain thickness and is difficult to apply evenly, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprinting stability and first-layer quality\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare usually not as good as when using\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eliquid glue\u003c\/strong\u003e. On the other hand,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eliquid glue\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emay make part removal more difficult. You should choose the appropriate glue type based on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efilament\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprinting environment\u003c\/strong\u003e, and other practical conditions. For more details, please refer to the official wiki:\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/wiki.bambulab.com\/en\/general\/how-to-use-bbl-liquid-glue\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eWhen using a scraper to remove prints, make sure to use the correct technique. If the model adheres too tightly to the build plate, apply alcohol to the interface between the model and the plate to reduce adhesion and make removal easier. This helps prevent damage to the model, the build plate, or potential injury to the user caused by excessive force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eIncreasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eFor X1 series, P1 series, and A1 printers, before auto-leveling, it is necessary to repeatedly rub the nozzle in the wiping area of the build plate to thoroughly remove any residual material at the tip of the nozzle. The coating in the wiping area will gradually wear over time, which is normal and does not affect print quality or nozzle lifespan, so there is no need to worry about quality issues.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eDust and grease deposits on the build plate can reduce adhesion. It is recommended to regularly clean the build plate with warm water and dish soap to maintain optimal adhesion. Do not use other unapproved cleaning agents.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBambu Lab recommends only using Bambu Lab official glue on the Bambu Lab build plates, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates. Do not clean the Engineering Plate with Acetone, as it will damage the Engineering Plate surface.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAlways wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eThe latest firmware brings significant improvements to the Bambu Engineering Plate calibration using the Micro Lidar, and it is now fully compatible with the automatic calibration process.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eThe Engineering Plate plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eRecommended Settings\u003c\/h5\u003e\n\u003cp\u003ePlease note that other slicer settings might need to be adjusted based on the printed model and the filament requirements\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eHeatbed Temperature\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eGlue Stick Required?\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePLA\/PLA-CF\/PLA-GF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e45~60℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePETG\/PETG-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e60~80℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eABS (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~100℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eASA (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~100℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eTPU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e35~45℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePVA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e45~60℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePC\/PC-CF (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~110℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePA\/PA-CF\/PAHT-CF (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~110℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePET-CF (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e80~100℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePolyester powder + manganese steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eSurface Temperature Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cspan\u003eUp to 120℃\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eThickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cspan\u003e0.5mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eUsable Print Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cspan\u003eP2S-256mm*256mm\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2S-350mm*320mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2D-350mm*320mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePackaging Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cspan\u003eP2S-295mm*315mm*13mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2S-393mm*380mm*15mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2D-393mm*380mm*15mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePackaging Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cspan\u003e0.50kg\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e0.78kg\u003cbr\u003e0.78kg\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

Bambu Lab Engineering Plate [ H2D | H2S ]

$84.99

One Build Plate for All Filaments With a simple layer of glue, the Engineering Plate is compatible with our entire filament lineup, it's the perfect go-to solution when you're not sure which plate to use. Durable Smooth Surface Coating The refreshed coating significantly improves the plate's temperature, scratch, and corrosion resistance....

Bambu Lab Engineering Plate for P2S, P1 Series, A1 and X1C

Bambu Lab Engineering Plate [ P2S | P1 Series | A1 | X1C ]

EN STOCK : 0

$42.99

{"id":9109595128044,"title":"Bambu Lab Engineering Plate [ P2S | P1 Series | A1 | X1C ]","handle":"bambu-lab-engineering-plate-p2s-p1-series-a1-x1c","description":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Engineering_Plate_PC.png?v=1765913950\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOne Build Plate for All Filaments\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eWith a simple layer of glue, the Engineering Plate is compatible with our entire filament lineup, it's the perfect go-to solution when you're not sure which plate to use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDurable Smooth Surface Coating\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe refreshed coating significantly improves the plate's temperature, scratch, and corrosion resistance. Built to withstand prolonged high-temperature printing and hundreds of washes and peels, its smooth, dependable surface guarantees stable adhesion every single time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSmooth \u0026amp; Natural Surface Finish\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe smooth base coating can impart a smooth \u0026amp; flat texture to the bottom surface of the printed object, better blend-in with other surfaces.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eConsiderations\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003col style=\"list-style-type: decimal;\" class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBefore printing with any filament, it is recommended to apply glue on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEngineering Plate\u003c\/strong\u003e. Applying\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esolid glue\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecan make part removal easier, but since solid glue has a certain thickness and is difficult to apply evenly, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprinting stability and first-layer quality\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare usually not as good as when using\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eliquid glue\u003c\/strong\u003e. On the other hand,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eliquid glue\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emay make part removal more difficult. You should choose the appropriate glue type based on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efilament\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprinting environment\u003c\/strong\u003e, and other practical conditions. For more details, please refer to the official wiki:\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/wiki.bambulab.com\/en\/general\/how-to-use-bbl-liquid-glue\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eWhen using a scraper to remove prints, make sure to use the correct technique. If the model adheres too tightly to the build plate, apply alcohol to the interface between the model and the plate to reduce adhesion and make removal easier. This helps prevent damage to the model, the build plate, or potential injury to the user caused by excessive force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eIncreasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eFor X1 series, P1 series, and A1 printers, before auto-leveling, it is necessary to repeatedly rub the nozzle in the wiping area of the build plate to thoroughly remove any residual material at the tip of the nozzle. The coating in the wiping area will gradually wear over time, which is normal and does not affect print quality or nozzle lifespan, so there is no need to worry about quality issues.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eDust and grease deposits on the build plate can reduce adhesion. It is recommended to regularly clean the build plate with warm water and dish soap to maintain optimal adhesion. Do not use other unapproved cleaning agents.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBambu Lab recommends only using Bambu Lab official glue on the Bambu Lab build plates, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates. Do not clean the Engineering Plate with Acetone, as it will damage the Engineering Plate surface.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAlways wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eThe latest firmware brings significant improvements to the Bambu Engineering Plate calibration using the Micro Lidar, and it is now fully compatible with the automatic calibration process.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eThe Engineering Plate plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eRecommended Settings\u003c\/h5\u003e\n\u003cp\u003ePlease note that other slicer settings might need to be adjusted based on the printed model and the filament requirements\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eHeatbed Temperature\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eGlue Stick Required?\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePLA\/PLA-CF\/PLA-GF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e45~60℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePETG\/PETG-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e60~80℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eABS (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~100℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eASA (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~100℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eTPU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e35~45℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePVA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e45~60℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePC\/PC-CF (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~110℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePA\/PA-CF\/PAHT-CF (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~110℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePET-CF (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e80~100℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePolyester powder + manganese steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eSurface Temperature Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cspan\u003eUp to 120℃\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eThickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cspan\u003e0.5mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eUsable Print Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cspan\u003eP2S-256mm*256mm\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2S-350mm*320mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2D-350mm*320mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePackaging Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cspan\u003eP2S-295mm*315mm*13mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2S-393mm*380mm*15mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2D-393mm*380mm*15mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePackaging Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cspan\u003e0.50kg\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e0.78kg\u003cbr\u003e0.78kg\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2025-12-16T14:41:18-05:00","created_at":"2025-12-16T14:41:16-05:00","vendor":"Bambu Lab","type":"bambu Lab parts","tags":["A1","P1 Series","P2S","X1C"],"price":4299,"price_min":4299,"price_max":4299,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47115622973676,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-PRT-ENG-PLT-PAX","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bambu Lab Engineering Plate [ P2S | P1 Series | A1 | X1C ]","public_title":null,"options":["Default Title"],"price":4299,"weight":464,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6937285510136","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Bambu_Lab_Engineering_Plate_P2S_P1_Series_A1_X1C_Product_Picture.webp?v=1765913650"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Bambu_Lab_Engineering_Plate_P2S_P1_Series_A1_X1C_Product_Picture.webp?v=1765913650","options":["Title"],"media":[{"alt":"Bambu Lab Engineering Plate for P2S, P1 Series, A1 and X1C","id":36426283450604,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Bambu_Lab_Engineering_Plate_P2S_P1_Series_A1_X1C_Product_Picture.webp?v=1765913650"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Bambu_Lab_Engineering_Plate_P2S_P1_Series_A1_X1C_Product_Picture.webp?v=1765913650","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Engineering_Plate_PC.png?v=1765913950\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOne Build Plate for All Filaments\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eWith a simple layer of glue, the Engineering Plate is compatible with our entire filament lineup, it's the perfect go-to solution when you're not sure which plate to use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDurable Smooth Surface Coating\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe refreshed coating significantly improves the plate's temperature, scratch, and corrosion resistance. Built to withstand prolonged high-temperature printing and hundreds of washes and peels, its smooth, dependable surface guarantees stable adhesion every single time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSmooth \u0026amp; Natural Surface Finish\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe smooth base coating can impart a smooth \u0026amp; flat texture to the bottom surface of the printed object, better blend-in with other surfaces.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eConsiderations\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003col style=\"list-style-type: decimal;\" class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBefore printing with any filament, it is recommended to apply glue on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEngineering Plate\u003c\/strong\u003e. Applying\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esolid glue\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecan make part removal easier, but since solid glue has a certain thickness and is difficult to apply evenly, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprinting stability and first-layer quality\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare usually not as good as when using\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eliquid glue\u003c\/strong\u003e. On the other hand,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eliquid glue\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emay make part removal more difficult. You should choose the appropriate glue type based on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efilament\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprinting environment\u003c\/strong\u003e, and other practical conditions. For more details, please refer to the official wiki:\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/wiki.bambulab.com\/en\/general\/how-to-use-bbl-liquid-glue\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eWhen using a scraper to remove prints, make sure to use the correct technique. If the model adheres too tightly to the build plate, apply alcohol to the interface between the model and the plate to reduce adhesion and make removal easier. This helps prevent damage to the model, the build plate, or potential injury to the user caused by excessive force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eIncreasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eFor X1 series, P1 series, and A1 printers, before auto-leveling, it is necessary to repeatedly rub the nozzle in the wiping area of the build plate to thoroughly remove any residual material at the tip of the nozzle. The coating in the wiping area will gradually wear over time, which is normal and does not affect print quality or nozzle lifespan, so there is no need to worry about quality issues.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eDust and grease deposits on the build plate can reduce adhesion. It is recommended to regularly clean the build plate with warm water and dish soap to maintain optimal adhesion. Do not use other unapproved cleaning agents.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBambu Lab recommends only using Bambu Lab official glue on the Bambu Lab build plates, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates. Do not clean the Engineering Plate with Acetone, as it will damage the Engineering Plate surface.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAlways wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eThe latest firmware brings significant improvements to the Bambu Engineering Plate calibration using the Micro Lidar, and it is now fully compatible with the automatic calibration process.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eThe Engineering Plate plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eRecommended Settings\u003c\/h5\u003e\n\u003cp\u003ePlease note that other slicer settings might need to be adjusted based on the printed model and the filament requirements\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eHeatbed Temperature\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eGlue Stick Required?\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePLA\/PLA-CF\/PLA-GF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e45~60℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePETG\/PETG-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e60~80℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eABS (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~100℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eASA (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~100℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eTPU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e35~45℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePVA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e45~60℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePC\/PC-CF (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~110℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePA\/PA-CF\/PAHT-CF (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90~110℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePET-CF (not for A1 mini)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e80~100℃\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGlue Stick\/Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePolyester powder + manganese steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eSurface Temperature Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cspan\u003eUp to 120℃\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eThickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cspan\u003e0.5mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003eUsable Print Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cspan\u003eP2S-256mm*256mm\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2S-350mm*320mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2D-350mm*320mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePackaging Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cspan\u003eP2S-295mm*315mm*13mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2S-393mm*380mm*15mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH2D-393mm*380mm*15mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cstrong\u003ePackaging Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cspan\u003e0.50kg\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e0.78kg\u003cbr\u003e0.78kg\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

Bambu Lab Engineering Plate [ P2S | P1 Series | A1 | X1C ]

$42.99

Carte Cadeau Voxel

EN STOCK : 0

$40.00

{"id":9105784897772,"title":"Carte Cadeau Voxel","handle":"carte-cadeau-voxel","description":"\u003cp\u003eCertificat Cadeau pour M. Patrick Gagnon\u003c\/p\u003e","published_at":"2025-12-12T10:09:32-05:00","created_at":"2025-12-12T10:09:29-05:00","vendor":"Voxel Factory","type":"","tags":[],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47098186301676,"title":"$40.00","option1":"$40.00","option2":null,"option3":null,"sku":null,"requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Carte Cadeau Voxel - $40.00","public_title":"$40.00","options":["$40.00"],"price":4000,"weight":0,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Denominations"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCertificat Cadeau pour M. Patrick Gagnon\u003c\/p\u003e"}

Carte Cadeau Voxel

$40.00

Certificat Cadeau pour M. Patrick Gagnon

Prusa Einsy RAMBo (MK3/S/+)

EN STOCK : 0

$84.99

{"id":9095136674028,"title":"Prusa Einsy RAMBo (MK3\/S\/+)","handle":"prusa-einsy-rambo-mk3-s","description":"\u003cp\u003eThis Einsy RAMBo board is flashed with firmware, which is compatible with MK3S and MK3S+ printers. In the case of the MK3 printer, you have to install a different version of the firmware.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca class=\"voxel-product-description-link\" target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/article\/firmware-updating-mk3s-mk3s-mk3_2227\"\u003eVisit this article\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor more instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eEinsy RAMBo with MK3S\/+ firmware (1 pcs)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePlug Aligner plastic part (1 pcs)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eATO Blade fuses 5A (rated for 32 VDC) (2 pcs)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eATO Blade fuse 15A (rated for 32 VDC) (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eManufacturer: Ultimachine\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eMain MCU: Atmega 2560\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eUSB-to-serial chip: Atmega 32u4\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eStepper motor driver: TMC2130, 1\/256th microstep motor drivers\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eRequires 24V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca target=\"_blank\" class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-12-03T12:04:59-05:00","created_at":"2025-12-03T12:04:57-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MK3","MK3S","MK3S-Plus"],"price":8499,"price_min":8499,"price_max":8499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47057874944236,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-EIN-RAM-MK3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Einsy RAMBo (MK3\/S\/+)","public_title":null,"options":["Default Title"],"price":8499,"weight":150,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Einsy_RAMBo_MK3_S_plus_Product_Picture.webp?v=1764781344"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Einsy_RAMBo_MK3_S_plus_Product_Picture.webp?v=1764781344","options":["Title"],"media":[{"alt":"Prusa Einsy RAMBo MK3\/S\/+","id":36345648546028,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Einsy_RAMBo_MK3_S_plus_Product_Picture.webp?v=1764781344"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Einsy_RAMBo_MK3_S_plus_Product_Picture.webp?v=1764781344","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis Einsy RAMBo board is flashed with firmware, which is compatible with MK3S and MK3S+ printers. In the case of the MK3 printer, you have to install a different version of the firmware.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca class=\"voxel-product-description-link\" target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/article\/firmware-updating-mk3s-mk3s-mk3_2227\"\u003eVisit this article\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor more instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eEinsy RAMBo with MK3S\/+ firmware (1 pcs)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePlug Aligner plastic part (1 pcs)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eATO Blade fuses 5A (rated for 32 VDC) (2 pcs)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eATO Blade fuse 15A (rated for 32 VDC) (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eManufacturer: Ultimachine\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eMain MCU: Atmega 2560\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eUSB-to-serial chip: Atmega 32u4\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eStepper motor driver: TMC2130, 1\/256th microstep motor drivers\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eRequires 24V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca target=\"_blank\" class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

Prusa Einsy RAMBo (MK3/S/+)

$84.99

This Einsy RAMBo board is flashed with firmware, which is compatible with MK3S and MK3S+ printers. In the case of the MK3 printer, you have to install a different version of the firmware. Visit this article for more instructions. This product includes: Einsy RAMBo with MK3S/+ firmware (1 pcs) Plug Aligner plastic part (1 pcs) ATO Blade fuse...

Prusa Anti-vibration feet

EN STOCK : 0

$5.99

{"id":9095123599596,"title":"Prusa Anti-vibration feet","handle":"prusa-anti-vibration-feet","description":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAnti-vibration foot (4\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epcs\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-12-03T11:31:54-05:00","created_at":"2025-12-03T11:31:52-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One L","CORE One\/+"],"price":599,"price_min":599,"price_max":599,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47057853939948,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-ANT-VIB-FEE-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Anti-vibration feet","public_title":null,"options":["Default Title"],"price":599,"weight":150,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Anti_vibration_feet_Product_Picture.webp?v=1764779828"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Anti_vibration_feet_Product_Picture.webp?v=1764779828","options":["Title"],"media":[{"alt":"Prusa Anti-vibration feet","id":36345629376748,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Anti_vibration_feet_Product_Picture.webp?v=1764779828"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Prusa_Anti_vibration_feet_Product_Picture.webp?v=1764779828","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAnti-vibration foot (4\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epcs\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

Prusa Anti-vibration feet

$5.99

This product includes: Anti-vibration foot (4 pcs) To correctly install this replacement part, visit the Prusa Research knowledge base at help.prusa3d.com, select your specific printer model, and follow the instructions provided in the repair manual.

Prusa Noga BN1010 - spare N1 blades for deburring tool (10 pcs)

EN STOCK : 0

$31.99

{"id":9095119962348,"title":"Prusa Noga BN1010 - spare N1 blades for deburring tool (10 pcs)","handle":"prusa-noga-bn1010-spare-n1-blades-for-deburring-tool-10-pcs","description":"\u003cp\u003eSpare blades for Noga Teddy Burr - TB1000 deburring tool.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade material: H.S.S.\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade hardness: 62-64 HRC\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade angle: 40°\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eWeight: 13g\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePack quantity: 10 pcs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/prusa-research-tools\/products\/prusa-noga-teddy-burr-tb1000-deburring-tool\" class=\"voxel-product-description-link\"\u003eNoga Teddy Burr - TB1000 deburring tool\u003c\/a\u003e\u003c\/p\u003e","published_at":"2025-12-03T11:14:30-05:00","created_at":"2025-12-03T11:14:28-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":[],"price":3199,"price_min":3199,"price_max":3199,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47057814159596,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-NOG-BN1010-SPN-N1B","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Noga BN1010 - spare N1 blades for deburring tool (10 pcs)","public_title":null,"options":["Default Title"],"price":3199,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_BN1010_spare_N1_blades_for_deburring_tool_10_pcs_Product_Picture.webp?v=1764777343"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_BN1010_spare_N1_blades_for_deburring_tool_10_pcs_Product_Picture.webp?v=1764777343","options":["Title"],"media":[{"alt":"Noga BN1010 spare N1 blades for deburring tool (10 pcs)","id":36345587630316,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_BN1010_spare_N1_blades_for_deburring_tool_10_pcs_Product_Picture.webp?v=1764777343"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_BN1010_spare_N1_blades_for_deburring_tool_10_pcs_Product_Picture.webp?v=1764777343","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eSpare blades for Noga Teddy Burr - TB1000 deburring tool.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade material: H.S.S.\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade hardness: 62-64 HRC\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade angle: 40°\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eWeight: 13g\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePack quantity: 10 pcs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/prusa-research-tools\/products\/prusa-noga-teddy-burr-tb1000-deburring-tool\" class=\"voxel-product-description-link\"\u003eNoga Teddy Burr - TB1000 deburring tool\u003c\/a\u003e\u003c\/p\u003e"}

Prusa Noga BN1010 - spare N1 blades for deburring tool (10 pcs)

$31.99

Spare blades for Noga Teddy Burr - TB1000 deburring tool. Main features: Blade material: H.S.S. Blade hardness: 62-64 HRC Blade angle: 40° Weight: 13g Pack quantity: 10 pcs Noga Teddy Burr - TB1000 deburring tool

Prusa Noga Teddy Burr - TB1000 Deburring tool

EN STOCK : 0

$23.99

{"id":9094651085036,"title":"Prusa Noga Teddy Burr - TB1000 Deburring tool","handle":"prusa-noga-teddy-burr-tb1000-deburring-tool","description":"\u003cp\u003eDesigned for hard to reach locations thanks to its compact 8 mm painted hexagonal aluminum handle. Perfect for removing brim material or cleaning up any edges or holes on your 3d prints.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eCompact size\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePocket clip\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHolds 2.6 mm N1 blade\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade material: H.S.S.\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade hardness: 62-64 HRC\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade angle: 40°\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade is replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/collections\/prusa-research-tools\/products\/prusa-noga-bn1010-spare-n1-blades-for-deburring-tool-10-pcs\"\u003eSpare blades for Noga Teddy Burr - TB1000\u003c\/a\u003e\u003c\/p\u003e","published_at":"2025-12-03T10:26:40-05:00","created_at":"2025-12-02T16:31:44-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["Tools"],"price":2399,"price_min":2399,"price_max":2399,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052698452204,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-NOG-TED-BUR-TB1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Noga Teddy Burr - TB1000 Deburring tool","public_title":null,"options":["Default Title"],"price":2399,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_Teddy_Burr_TB1000_Deburring_tool_Product_Picture.webp?v=1764695520"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_Teddy_Burr_TB1000_Deburring_tool_Product_Picture.webp?v=1764695520","options":["Title"],"media":[{"alt":"Noga Teddy Burr TB1000 Deburring tool","id":36340788920556,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_Teddy_Burr_TB1000_Deburring_tool_Product_Picture.webp?v=1764695520"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Noga_Teddy_Burr_TB1000_Deburring_tool_Product_Picture.webp?v=1764695520","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDesigned for hard to reach locations thanks to its compact 8 mm painted hexagonal aluminum handle. Perfect for removing brim material or cleaning up any edges or holes on your 3d prints.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eCompact size\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePocket clip\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHolds 2.6 mm N1 blade\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade material: H.S.S.\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade hardness: 62-64 HRC\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade angle: 40°\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eBlade is replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/collections\/prusa-research-tools\/products\/prusa-noga-bn1010-spare-n1-blades-for-deburring-tool-10-pcs\"\u003eSpare blades for Noga Teddy Burr - TB1000\u003c\/a\u003e\u003c\/p\u003e"}

Prusa Noga Teddy Burr - TB1000 Deburring tool

$23.99

Designed for hard to reach locations thanks to its compact 8 mm painted hexagonal aluminum handle. Perfect for removing brim material or cleaning up any edges or holes on your 3d prints. Main features: Compact size Pocket clip Holds 2.6 mm N1 blade Blade material: H.S.S. Blade hardness: 62-64 HRC Blade angle: 40° Blade is replaceable Spa...

Prusa Parking plate set

EN STOCK : 0

$21.99

{"id":9094567592172,"title":"Prusa Parking plate set","handle":"prusa-parking-plate-set","description":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eNOZZLE SEAL (5\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epcs\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePARKING PLATE (5\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epcs\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit our knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\" target=\"_blank\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-12-02T12:00:11-05:00","created_at":"2025-12-02T12:00:09-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["XL"],"price":2199,"price_min":2199,"price_max":2199,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052356223212,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-PRK-PLT-SET-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Parking plate set","public_title":null,"options":["Default Title"],"price":2199,"weight":150,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Parking_plate_set_Product_Picture.webp?v=1764694475"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Parking_plate_set_Product_Picture.webp?v=1764694475","options":["Title"],"media":[{"alt":"Parking plate set","id":36340635566316,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Parking_plate_set_Product_Picture.webp?v=1764694475"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Parking_plate_set_Product_Picture.webp?v=1764694475","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eNOZZLE SEAL (5\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epcs\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePARKING PLATE (5\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epcs\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit our knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\" target=\"_blank\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

Prusa Parking plate set

$21.99

This product includes: NOZZLE SEAL (5 pcs) PARKING PLATE (5 pcs) To correctly install this replacement part, visit our knowledge base at help.prusa3d.com, select your specific printer model, and follow the instructions provided in the repair manual.

Prusa Dwarf board

EN STOCK : 0

$82.99

{"id":9094557106412,"title":"Prusa Dwarf board","handle":"prusa-dwarf-board","description":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eDwarf Board (1\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epc\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit our knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-12-02T11:45:09-05:00","created_at":"2025-12-02T11:45:07-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["prusa","XL"],"price":8299,"price_min":8299,"price_max":8299,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052336660716,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-BRD-DWF-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Dwarf board","public_title":null,"options":["Default Title"],"price":8299,"weight":200,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Dwarf_Board_Product_Picture.webp?v=1764693710"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Dwarf_Board_Product_Picture.webp?v=1764693710","options":["Title"],"media":[{"alt":"Dwarf Board","id":36340533690604,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Dwarf_Board_Product_Picture.webp?v=1764693710"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Dwarf_Board_Product_Picture.webp?v=1764693710","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eDwarf Board (1\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epc\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit our knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

Prusa Dwarf board

$82.99

This product includes: Dwarf Board (1 pc) To correctly install this replacement part, visit our knowledge base at help.prusa3d.com, select your specific printer model, and follow the instructions provided in the repair manual.

Prusa Cable splitter-dwarf

EN STOCK : 0

$40.99

{"id":9094553501932,"title":"Prusa Cable splitter-dwarf","handle":"prusa-cable-splitter-dwarf","description":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eCable splitter-dwarf (1\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epc\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-12-02T11:29:00-05:00","created_at":"2025-12-02T11:28:58-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["prusa","XL"],"price":4099,"price_min":4099,"price_max":4099,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052307431660,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-CBL-SPL-DWF-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa Cable splitter-dwarf","public_title":null,"options":["Default Title"],"price":4099,"weight":200,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Cable_splitter_dwarf_Product_Picture.webp?v=1764692333"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Cable_splitter_dwarf_Product_Picture.webp?v=1764692333","options":["Title"],"media":[{"alt":"Cable splitter dwarf","id":36340333773036,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Cable_splitter_dwarf_Product_Picture.webp?v=1764692333"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Cable_splitter_dwarf_Product_Picture.webp?v=1764692333","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eCable splitter-dwarf (1\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epc\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

Prusa Cable splitter-dwarf

$40.99

This product includes: Cable splitter-dwarf (1 pc) To correctly install this replacement part, visit the Prusa Research knowledge base at help.prusa3d.com, select your specific printer model, and follow the instructions provided in the repair manual.

Heatbed thermistor set for MK4/S

EN STOCK : 0

$10.99

{"id":9094525419756,"title":"Heatbed thermistor set for MK4\/S","handle":"heatbed-thermistor-set-for-mk4-s","description":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHeatbed thermistor (1 pc)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eKapton tape (1 pc)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAluminium tape (1 pc)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa knowledge base at \u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-12-02T10:44:54-05:00","created_at":"2025-12-02T10:44:53-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MK3.5","MK3.5S","MK3.9","MK3.9S","MK4","MK4S"],"price":1099,"price_min":1099,"price_max":1099,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052247433452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-THR-BED-MK4-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Heatbed thermistor set for MK4\/S","public_title":null,"options":["Default Title"],"price":1099,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Heatbed_thermistor_set_for_MK4_S_Product_Picture.webp?v=1764690249"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Heatbed_thermistor_set_for_MK4_S_Product_Picture.webp?v=1764690249","options":["Title"],"media":[{"alt":"Heatbed thermistor set for MK4\/S","id":36339966542060,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Heatbed_thermistor_set_for_MK4_S_Product_Picture.webp?v=1764690249"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/Heatbed_thermistor_set_for_MK4_S_Product_Picture.webp?v=1764690249","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHeatbed thermistor (1 pc)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eKapton tape (1 pc)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAluminium tape (1 pc)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa knowledge base at \u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

Heatbed thermistor set for MK4/S

$10.99

This product includes: Heatbed thermistor (1 pc) Kapton tape (1 pc) Aluminium tape (1 pc) To correctly install this replacement part, visit the Prusa knowledge base at help.prusa3d.com, select your specific printer model, and follow the instructions provided in the repair manual.

HighTemp Powder-coated Print Sheet [HT90]

EN STOCK : 0

$199.99

{"id":9094475055340,"title":"HighTemp Powder-coated Print Sheet [HT90]","handle":"hightemp-powder-coated-print-sheet-ht90","description":"\u003cp\u003e\u003cspan\u003eThe HighTemp print sheet is intended for printing with special high-temperature materials, such as PEEK, PEEK-CF, PEI, PEKK, and PPSU, which may otherwise have poor (or too strong) adhesion on standard steel sheets. This sheet is compatible with Prusa Pro HT90.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOVERVIEW:\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike the regular Textured (TXT) sheet, the HighTemp sheet is designed for printing with high-temperature materials. It offers good adhesion to materials like PEEK, PEEK-CF, PEI, PEKK, and PPSU, plus it resists multiple cycles at temperatures over 100 °C. However, this print sheet is not suitable for printing standard low-temperature materials, such as PLA and PETG.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eList of supported materials:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEEK, PEEK-CF, PEEK-GF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEI1010, PEI 9085, PEI-CF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEKK, PEKK-CF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePES\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePPSU\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePSU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis print sheet has a very similar surface structure to the regular TXT sheet. This surface finish is made by powder coating on metal and leaves a nice, distinct textured look on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the tops of the small bumps can be scratched, which will not imprint on the bottom of the model. This type of surface is used on the Prusa print farm. Look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in the Prusa Online\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/article\/ht90-hightemp-powder-coated-print-sheet_900274\" target=\"_blank\"\u003eHelp article.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWARNING\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNever clean the HighTemp print sheet with IPA, acetone, or any other alcohol-based solvents! Doing so will damage the surface. Learn more about printing on the HighTemp print sheet in the online Prusa Help article.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; flex-direction: column; gap: 1em;\"\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eSuitable for printing high-temperature materials\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eTransfers texture to prints\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eMore forgiving Live Adjust Z setting\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eCan be washed only with dish soap and water\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eRequires a separation layer (\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/products\/magigoo-pro-ht\"\u003eMagigoo HT\u003c\/a\u003e)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eUnsuitable for low-temperature materials, such as PLA and PETG\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eGets damaged when cleaned with alcohol-based solvents\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as print sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks, or other cosmetic damage, is also not covered by the warranty. This includes dots caused by probing during the mesh bed leveling process, visible purge line, and local surface damage caused by applying an insufficient amount of\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/products\/magigoo-pro-ht\"\u003eMagigoo HT\u003c\/a\u003e. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 0.5em;\"\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/local-damage.jpg?v=1764686982\" alt=\"Local damage\"\u003e\u003cspan\u003eLocal surface damage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/nozzle-scratches.jpg?v=1764686981\" alt=\"Nozzles scratches\"\u003e\u003cspan\u003eScratched surface\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/nozzle-dots.jpg?v=1764686982\" alt=\"Nozzles dots\"\u003e\u003cspan\u003eVisible dots caused by probing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-12-02T09:50:59-05:00","created_at":"2025-12-02T09:50:58-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["HT90"],"price":19999,"price_min":19999,"price_max":19999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052012945644,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SHT-HTP-HT90-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"HighTemp Powder-coated Print Sheet [HT90]","public_title":null,"options":["Default Title"],"price":19999,"weight":150,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture.webp?v=1764684634"],"featured_image":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture.webp?v=1764684634","options":["Title"],"media":[{"alt":"HighTemp Powder coated Print Sheet [HT90]","id":36339142754540,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture.webp?v=1764684634"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/voxelfactory.myshopify.com\/cdn\/shop\/files\/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture.webp?v=1764684634","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe HighTemp print sheet is intended for printing with special high-temperature materials, such as PEEK, PEEK-CF, PEI, PEKK, and PPSU, which may otherwise have poor (or too strong) adhesion on standard steel sheets. This sheet is compatible with Prusa Pro HT90.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOVERVIEW:\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike the regular Textured (TXT) sheet, the HighTemp sheet is designed for printing with high-temperature materials. It offers good adhesion to materials like PEEK, PEEK-CF, PEI, PEKK, and PPSU, plus it resists multiple cycles at temperatures over 100 °C. However, this print sheet is not suitable for printing standard low-temperature materials, such as PLA and PETG.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eList of supported materials:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEEK, PEEK-CF, PEEK-GF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEI1010, PEI 9085, PEI-CF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEKK, PEKK-CF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePES\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePPSU\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePSU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis print sheet has a very similar surface structure to the regular TXT sheet. This surface finish is made by powder coating on metal and leaves a nice, distinct textured look on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the tops of the small bumps can be scratched, which will not imprint on the bottom of the model. This type of surface is used on the Prusa print farm. Look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in the Prusa Online\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/article\/ht90-hightemp-powder-coated-print-sheet_900274\" target=\"_blank\"\u003eHelp article.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWARNING\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNever clean the HighTemp print sheet with IPA, acetone, or any other alcohol-based solvents! Doing so will damage the surface. Learn more about printing on the HighTemp print sheet in the online Prusa Help article.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; flex-direction: column; gap: 1em;\"\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eSuitable for printing high-temperature materials\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eTransfers texture to prints\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eMore forgiving Live Adjust Z setting\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eCan be washed only with dish soap and water\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eRequires a separation layer (\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/products\/magigoo-pro-ht\"\u003eMagigoo HT\u003c\/a\u003e)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eUnsuitable for low-temperature materials, such as PLA and PETG\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eGets damaged when cleaned with alcohol-based solvents\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as print sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks, or other cosmetic damage, is also not covered by the warranty. This includes dots caused by probing during the mesh bed leveling process, visible purge line, and local surface damage caused by applying an insufficient amount of\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/products\/magigoo-pro-ht\"\u003eMagigoo HT\u003c\/a\u003e. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 0.5em;\"\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/local-damage.jpg?v=1764686982\" alt=\"Local damage\"\u003e\u003cspan\u003eLocal surface damage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/nozzle-scratches.jpg?v=1764686981\" alt=\"Nozzles scratches\"\u003e\u003cspan\u003eScratched surface\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/nozzle-dots.jpg?v=1764686982\" alt=\"Nozzles dots\"\u003e\u003cspan\u003eVisible dots caused by probing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

HighTemp Powder-coated Print Sheet [HT90]

$199.99

The HighTemp print sheet is intended for printing with special high-temperature materials, such as PEEK, PEEK-CF, PEI, PEKK, and PPSU, which may otherwise have poor (or too strong) adhesion on standard steel sheets. This sheet is compatible with Prusa Pro HT90. OVERVIEW: The Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. ...