$25.99
PolyTerra PLA: this is Polymaker next-generation PLA filament, featuring improved printing quality, speed, and reliability while retaining all the nice attributes of PLA. Polymaker also introduced several innovations to make the product much more environmentally sustainable. It is a sustainable product sourced naturally and for every spool produ...
$27.99
PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : natural, white, grey, black, orange, yellow, green, teal, blue, purple and red Data Sheets Click here to download the Technical Data Sheet for the PolyLite PLA filament. Click here to downloa...
$9.99
The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more! *** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED ...
$27.99
PolyLite PETG by Polymaker is a high-quality PETG filament offering balanced mechanical properties and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : Clear, white, grey, black, orange, yellow, green, teal, blue, purple and red Data Sheets Click here to download the Technical Data Sheet for the PolyLite PETG filament. Click...
$9.99
The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more! Unlike its sibling the 3DLAC Spray, this bottle...
$9.99
0.40mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.40mm Filament diameter : 1.75mm Thread : M6
$13.27
Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+ / MK3.5 This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm To correctly install this replacement part, visit the Prusa Research kno...
$17.00
* 6.4 oz or 24 oz ** For industrial use only *** SLA/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.) *** -> Hacking t-glase to look more like glass! <- *** XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels...
$31.99
PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : bronze, silver, gold, lime, blue and magenta Technical Data Sheet Click here to download the Technical Data Sheet for the PolyLite Silk PLA filament.
$11.99
Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+ / MINI
$7.94
Replacement heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 650 mm To correctly install this replacement part, visit the Prusa Research knowledge base at hel...
$24.99
Meet the new Materio3D Regular PLA filament! Materio3D's Regular PLA works well and demonstrates all the typical characteristics of PLA. - It prints exceptionally well and the final print result is of high quality.- This filament is stiff but a little more brittle than Materio3D's Tough PLA. - It is the most economical filament in the PLA range...
PolyMide PA6-CF by Polymaker is a carbon fiber reinforced PA6 (Nylon) filament. The carbon fibers provide greater stiffness, strength and heat resistance compared to regular nylon filament.
IMPORTANT - These filaments are extremely sensitive to moisture. If the filament is exposed to air for a long period of time during printing, there is a very high risk of decreasing the quality of the filament. It is therefore necessary to keep the filament in a dry storage box at all times, even during printing. This box helps to preserve the integrity of the filament and protect it so that it retains its unique properties. Since this product can degrade easily, it is essential to obtain a filament dehydrator and use it to dry the filament before using it.
For the dry storage box, we recommend the Polymaker PolyBox Edition II.
For a Filament dehydrator, we recommend the PrintDry Filament Dryer Pro.
Filament diameter : 2.85mm
Net weight : 2kg
Color : Black
Recommended print settings :
Nozzle temperature: 280 - 300°C
Nozzle size: any size
Print speed: 60 mm/s
Retraction: 3 - 6 mm
Hot print bed: 25°C - 50°C, use PVA glue
Cold print bed: no
Environmental temperature: 25°C - 50°C
Download the Technical Datasheet (TDS)
Download the Safety Datasheet (SDS)
Réglages suggérés:
Température de la buse: 280°C - 300°C
Buse: toute taille
Vitesse d'impression: 60 mm/s
Rétraction: 3 - 6 mm
Température de lit chauffant: 25°C - 50°C, utiliser une colle de PVA
Impression sur lit non chauffant: non
Température environnementale : 25°C - 50°C
Téléchargez la fiche technique (pdf, en anglais)
Téléchargez la fiche de sécurité (pdf, en anglais)